The influence of hydraulic fluid viscosity on the process of their ultrasonic spraying

Authors

DOI:

https://doi.org/10.20535/2521-1943.2017.81.110866

Keywords:

ultrasonic spraying, viscous fluid, spray temperature

Abstract

It is known that there are many methods, due to which it is possible to spray a fluid with a given dispersion. All these methods have advantages and disadvantages. Most authors considered non-viscous fluids in their works. It is possible to reduce fluid viscosity by various methods, one of which is heating. In the work, the problem about the choice of temperature parameters for ultrasonic spraying of a viscous fluid is considered. The previous experiments showed, that the ultrasonic processing of the fluid leads to its heating, and when the "critical temperature" reaches, it begins spraying. However, it is necessary to spend extra time on heating the fluid with an ultrasonic disperser, which can become a significant disadvantage, which will make it impossible to use such method of spraying. One way that can help to overcome the difficulties, associated with reducing viscosity is to pre-heat the fluid to a predetermined temperature. The purpose of this work was to determine the features of spraying a viscous fluid, which was previously heated to a definately temperature.

References

  1. Luhovskyi, O.F., Lyashok, A.V. and Pyzhykov, Yu.O. (2011), “Sposob ta prystroyi dlya otrymannya ridynnoho aerozolyu”, Vestnik Nacional'nogo tehnicheskogo universitetaKievskij politehnicheskij institute”, Serija mashinostroenie, No. 61, vol. 1, pp. 107 – 113.
  2. Hmeljov, V.N., Shalunov, A.V., Golyh, R.N. and Shalunova, A.V. (2011), “Vyjavlenie optimal'nyh rezhimov i uslovij ul'trazvukovogo vozdejstvija dlja raspylenija vjazkih zhidkostej”, Jelektronnyj zhurnal Tehnicheskaja akustika”, No. 10, http://www.ejta.org 2011.
  3. Pazhi, D.G. and Galustov, V.S. (1984), Osnovy tehniki raspylenija zhidkostej, Himija, Moskow, Russia.
  4. Hmelev, V.N., Shalunov, A.V. and Shalunova, A.V. (2010), Ul'trazvukovoe raspylenie zhidkostej: monografija, Izd-vo Alt. gos. tehn. un-ta, Bijsk, Russia.
  5. Borodin, V.A. (1967), Raspylivanie zhidkostej, Mashinostroenie, Moscow, Russia.
  6. Lugovskoj, A.F., Chornyj, V.I., Chuhraev, N.V. and Movchanjuk, A.V. (2000), “Vozmozhnosti poluchenija melkodispersnogo ajerozolja v medicinskih ingaljatorah”, Vestnik Nacional'nogo tehnicheskogo universiteta “Kievskij politehnicheskij institute”, Serija mashinostroenie, No. 38, pp. 163–168.
  7. Eisenmenger, W. (1959), Dinamic Properties of the Surface Tension of Water and Aqueous Solutions of Surface Active Agents with Standing Capillary Waves in the Frequency Range from 10 kc/s to 1,5 Mc/s, Acustica, No. 4, p. 327.
  8. Koval', O.D. and Boyko, Yu.O. (2015), “Vyvchennya vplyvu vlastyvostey ridyny z metoyu vyboru ratsional'nykh rezhymiv yikh ul'trazvukovoho rozpylennya”, Mizhnarodna naukovo-tekhnichna konferentsiya “Hidroaeromekhanika v inzhenerniy praktytsi”, Kyiv, Ukraine, 26 - 29 may 2015, p. 66.
  9. Koval', O.D., Kozerats'kyy, M.S. and Mazurkevych, K.F. (2016), “Vyvchennya vplyvu reolohichnykh vlastyvostey ridyn z metoyu vyboru ratsional'nykh rezhymiv yikh ul'trazvukovoho rozpylennya”, Mizhnarodna naukovo-tekhnichna konferentsiya “Hidroaeromekhanika v inzhenerniy praktytsi”, Kyiv, Ukraine, 24 - 27 may 2016, pp.76-79.

Published

2017-12-29

How to Cite

[1]
Koval О. and Kozeratskyi М., “The influence of hydraulic fluid viscosity on the process of their ultrasonic spraying”, Mech. Adv. Technol., no. 3(81), pp. 21–27, Dec. 2017.

Issue

Section

Original study