Modeling of Loads in the Drive System of a Roller Press on an Example of a Press for Briquetting Brown Coal

Authors

DOI:

https://doi.org/10.20535/2521-1943.2018.84.150889

Keywords:

briquetting, briquette, fuel, roller press, drive system

Abstract

Fine grained or dust materials often need to be consolidated in a bigger form. This increases the some parameters of this raw material or prepare them for processing in appropriate technology, for example utilization. An example can be brown coal. In Europe there are rich resources of this raw material. Briquetting of this hi-energy raw material improves its properties for use. In the form of briquettes it can be used for energy production - mainly electricity, as well as heat. One of the most profitable methods of agglomeration is briquetting in roller press. When designing or choosing the press, proper compacting unit is required to ensure proper briquettes and the specified power of the press. This involves providing the necessary energy that should be provide to a drive system. Inadequate estimation of the power needed for the briquetting process results in the process being incorrect or creating unnecessary investment costs. The article presents the analysis of the influence of material and the volume of materials on the load of the drive system, with the given capacity of the press.

Author Biography

Michal Bembenek, AGH University of Science and Technology, Krakow

Department of Manufacturing Systems

References

  1. Bembenek M. (2017), Badania i perspektywy nowych obszarów stosowania pras walcowych. Przemysł Chemiczny, t. 96 nr 9, pp. 1845–1847.[ Дослідження та перспективи нових напрямів використання валковоих пресів]
  2. Sengar ,S.H. Mohod, A.G. Khandetod, Y.P. Patil S.S. and Chendake, A.D (2012), Performance of Briquetting Machine for Briquette Fuel. International Journal of Energy Engineering, vol. 2(1), pp. 28-34. doi: 10.5923/j.ijee.20120201.05
  3. Borowski ,G. and Hycnar, J.J. (2013), Utilization of Fine Coal Waste as a Fuel Briquettes. International Journal of Coal Preparation and Utilization, Vol. 33, Issue 4, pp. 194–204. DOI: 10.1080/19392699.2013.787993
  4. Kosturkiewicz, B. Janewicz, A. Magdziarz, A. Hryniewicz, M. Bembenek, M. Gara, P.(2014), Zagadnienie brykietowania węgla kamiennego koksowego. Rynek Energii, z. 2, pp. 104–109. [Проблема брикетування коксівного вугілля]
  5. Beker, U.G. (2000), Briquettability of Lignite and Woody Wastes Composite Fuel. Energy Sources, vol. 22, pp. 99-108.
  6. Chaiklangmuang, S. Supa, S. and Kaewpet, P. (2008), Development of fuel briquettes from biomass-lignite blends. Chiang Mai Journal of Science, vol. 1, pp. 43-50.
  7. Sedlacek, P. Martinek, T. and Fecko, P.(2003), Ecological pellets from brown coal and biomass. Journal of the Polish Mineral Engineering Society, nr 2, pp. 11-17.
  8. Bembenek, M. and Hryniewicz, M. (2010), Badania i opracowanie metody doboru układu zagęszczania prasy walcowej. Wydawnictwa AGH. Kraków. [Дослідження та розробка методу вибору системи стискання рулонного преса]
  9. Полянский ,Л.И. Кобелев, М.В. and Ветошкин, А.В.(2014), Оборудование для брикетирования отсева металлургической извести. Новые огнеупоры, (3), pp. 99-100. https://doi.org/10.17073/1683-4518-2014-3-11
  10. Bembenek, M. and Romanyshyn, T. (2018), Operation of Briquetting Roller Presses with an Asymmetrical Compaction Unit. Journal of Machine Construction and Maintenance, nr 2, pp. 117–122
  11. Hryniewicz, M. Bembenek, M. Janewicz, A. and Kosturkiewicz B.(2015), Brykietowanie materiałów drobnoziarnistych w prasach walcowych z niesymetrycznym układem zagęszczania. Przemysł Chemiczny, t. 94, nr 12, pp. 2223–2226. [Брикетування дрібнозернистих матеріалів у циліндричних пресах з несиметричною системою ущільнення]
  12. Логинов, Ю.Н. Бабайлов, Н.А. and Первухина, Д.Н. (2015), Физическое моделирование валкового прессования при несимметричном воздействии на уплотняемый материал. Известия Высших Учебных Заведений. Черная Металлургия, 58(3), pp. 186–191. https://doi.org/10.17073/0368-0797-2015-3-186-191
  13. Hryniewicz, M.(1997) Metoda doboru pras walcowych oraz opracowania założeń do ich modernizacji lub konstrukcji. Kraków, Wydawnictwa AGH. [Метод вибору валковоих пресів та розробка припущень для їх модернізації або будівництва]

Downloads

Published

2018-12-26

How to Cite

[1]
M. Bembenek, “Modeling of Loads in the Drive System of a Roller Press on an Example of a Press for Briquetting Brown Coal”, Mech. Adv. Technol., vol. 84, no. 3(84), pp. 113–124, Dec. 2018.

Issue

No. 3(84) (2018)

Section

Original study

License

Copyright (c) 2020 Mechanics and Advanced Technologies

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The ownership of copyright remains with the Authors.
 
Authors may use their own material in other publications provided that the Journal is acknowledged as the original place of publication and National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” as the Publisher.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work