Average local velocity in the round pipe for fluid flow overclocking

Authors

  • O. Yakhno Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine
  • R. Hnativ Lviv Polytechnic National University, Ukraine
  • I. Hnativ Lviv Polytechnic National University, Ukraine
  • Seied Farshad Razavy Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2521-1943.2018.84.152885

Keywords:

unstable, nonstationary, fluid motion, flow structure

Abstract

The paper presents the results of experimental studies of the accelerating motion of a liquid in a cylindrical tube from a state of rest. Thermal anemometric equipment is used to determine the local characteristics of a non-stationary flow. It is established that with accelerated fluid motion from the state of rest to the appearance of turbulence, a uniform distribution of the velocities in the cross section of the pipe remains and only gradients of velocities are observed in a thin wall layer. At the moment of transition to the turbulent regime, a turning point appears on the graph of the change in the mean velocity, and the velocity distribution and the intensity of turbulence undergo significant changes in comparison with stationary turbulent flows. Turbulence is generated in the near-wall region and extends to the center of the pipeline section at practically constant speed

References

  2. Gnatív, R.M. (2012), “Yeksperimental'ne viznachennya pul'satsíí̈ dotichnikh napruzhen' na stíntsí truboprovodu pri perekhídnomu rezhimí rukhu rídini”, Promislova gídravlíka í pnevmatika, vol. 37, no. 3, pp. 52-54.
  3. Gnatív, R.M. (2013), “Doslídzhennya rozpodílu shvidkostey pri neustaleníy techíí̈ rídini v truboprovodí”, Promislova gídravlíka í pnevmatika, vol. 40, no. 2, pp. 57-59.
  4. Maruyama, T., Kuribayashi, Т. and Mizushina, T. (1976), “The structure of the turbulence in transient pipe flows”, Journ. of Chem. Eng. of Japan, vol. 9, no. 6, pp. 431-439.
  5. Maruyama, Т., Kato, Y. and Mizushina, T. (1978), “Transition to turbulence in starting pipe flows”, J. Chem. Eng. Japan, vol. 11, no. 5, рp. 346-353.
  6. Yakhno, O.M. and Gnatív, R.M. (2013), Zalezhníst' seredn'oí̈ shvidkostí potoku víd zrostannya tisku pri neustalenomu rusí rídini v truboprovodí, Journal of Mechanical Engineering NTUU “Kyiv Polytechnic Institute”,vol. 69, no. 3, pp. 198-202.
  7. Shlikhting, G. (1974), Teoriya pogranichnogo sloya, Nauka, Moscow, Russia.

Downloads

Published

2018-12-26

How to Cite

[1]
O. Yakhno, R. Hnativ, I. Hnativ, and S. F. Razavy, “Average local velocity in the round pipe for fluid flow overclocking”, Mech. Adv. Technol., vol. 84, no. 3(84), pp. 86–90, Dec. 2018.

Issue

No. 3(84) (2018)

Section

Original study

License

Copyright (c) 2020 Mechanics and Advanced Technologies

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The ownership of copyright remains with the Authors.
 
Authors may use their own material in other publications provided that the Journal is acknowledged as the original place of publication and National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” as the Publisher.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work