Design of optimal roll parameters for rolling the dough

Authors

  • I. Stadnyk Ternopil Ivan Puluj National Technical University , Ternopil, Ukraine
  • T. Vitenko Ternopil Ivan Puluj National Technical University , Ternopil, Ukraine

DOI:

https://doi.org/10.20535/2521-1943.2019.85.164352

Keywords:

three-phase medium, Rollers, Rheology, Shear strain, Dough

Abstract

The article defines rather complex and unpredictable movement of dough in the gap between the working rolls and suggests the calculation of the optimal parameters for shaping rolls, particularly the parameters and their effect on the dough. The functional dependences of the permissible diameter and the gap between rotating rollers are substantiated. The block diagram of the geometric bounding parameters of the gradient field of the viscous fluid flow is proposed herewith and the equation on the basic constructive parameters (h, r) affecting the pouring process efficiency is rolled. The paper presents mathematical modeling of determining the power output over the rolling materials in the gap rotating rollers taking into account the rheological parameters of the final product. Determination of these parameters will reduce energy consumption, increase efficiency and reduce loss of material during production. This solution, proposed in the article, allows determination of the overall quality of the rolled product layer. Analysis of experimental results revealed that the main features of the machine provide the necessary stable shape products and provide good rheological parameters of these products. Rheological testing indicators allow for a rational approach to decision to operate a rolling process. At the same time they improve quality control methods and will have an impact on design parameters of rollers and chambers’ modes. The proposed method not only allows obtaining a predetermined pressure, but also allows defining the optimal shape of the gap, wherein the pressure gradient is constant.

References

  1. Stadnik, I.Y.( 2011), Modeling the motion of confusing components in the chamber of the dough machine.
  2. Machikhin, Y.A. (1992), Formation of food masses.
  3. Machikhin, Y.A. (1981), Engineering rheology food material.
  4. Nikolaev, B.A. (1976), Structural and mechanical properties of flour dough.
  5. Kafarov, V.V. (1976), System analysis of chemical process technology.
  6. Chakrabarti, S., Bergström, J.S., Lindskog, E., Sridhar, T. (2010), Computational Modeling of Dough Sheeting and Physical Interpretation of the Non-Linear Rheological Behavior of Wheat Flour Dough, pp. 278-288, https://doi.org/10.1016/j.jfoodeng.2010.04.010" target="_blank">https://doi.org/10.1016/j.jfoodeng.2010.04.010
  7. Evan Mitsoulis, Savvas G. Hatzikiriakos (2009), Rolling of breaddough: Experiments and simulations. Food and bioproduct sprocessing.
  8. Holzapfel, G.A. (2000), Nonlinear Solid Mechanics: A Continuum Approachfor Engineering, New York.
  9. Qi, F., Dai, S.C., Newberry, M.P, Love, R.J., and Tanner, R.I. (2008), A simple approach to predicting dough sheeting thickness.
  10. Xiao, W., Charalambides, M., and Williams, J.G. (2007), Sheeting of wheat flour dough, International Journal of Food Science and Technology, no. 42, pp. 699–707.

Downloads

Published

2019-04-14

How to Cite

[1]
I. Stadnyk and T. Vitenko, “Design of optimal roll parameters for rolling the dough”, Mech. Adv. Technol., no. 1(85), pp. 118–124, Apr. 2019.

Issue

No. 1(85) (2019)

Section

Original study

License

Copyright (c) 2020 Mechanics and Advanced Technologies

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The ownership of copyright remains with the Authors.
 
Authors may use their own material in other publications provided that the Journal is acknowledged as the original place of publication and National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” as the Publisher.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work