IMachining technology analysis for contour milling

Authors

DOI:

https://doi.org/10.20535/2521-1943.2020.89.202065

Keywords:

control of cutting, iMachining, stabilization MRR, contour milling on CNC Machine

Abstract

Recognizing the practical need to control the cutting process, leading firms in the high-tech market began to offer software products that, in the automatic mode, were said to be able to calculate the optimal cutting mode. Currently, the most advanced technology is called iMachining, which means intelligent Machining. The article presents an analysis of the control, automatically designed in the iMachining Solid CAM module, for machining a test part, the contour of which is formed by two straight circular arcs of a circle. It is shown that when designing control, geometric criteria are used that are associated with the path of shaping, so stabilization of the cutting process is not achieved. A control design method is proposed based on the results of simulation the Material Removal Rate (MRR), which allows stabilizing the cutting process.

References

  1. Petrakov, Y.V. (2011), Rozvitok CAM-systems avtomatizovanogo programuvannia verstativ CNC, Monograph К. Sichkar.
  2. Evchenko, К. and Manchuk, V. (2014), “CAM-system PowerMILL 2015 ot companiy Delcam. Vozmognosty novoy versii”, SAPR i graphica, no. 8, pp. 77–79. https://sapr.ru/article/24596
  3. Petrakov, Y.V. (2013), Sostoyanie I perspectyvi razvitia САМ-system v mashinostroenii, Journal of Mechanical Engineering NTUU “Kyiv Polytechnic Іnstitute”, no. 68, pp. 44–54. http://visnyk-mmi.kpi.ua/ru/2013/226-petrakov-y.html
  4. Vericut Optipath Module, CGTech. https://doi.org/10.20535/2305-9001.2013.68.33978
  5. SolidCAM iMachining. https://www.solidcam.com/ru/imachining/traektorii-imachining/
  6. Modul iMachining, Visokie technologii. http://vys-tech.ru/2018/02/02/imachining/
  7. Urmanov, M.D., Byktimirov, R.А., Nasybullin, R.К. and Yusainov, R.М. (2017), “Primenenie iMachining kak modulia vysocoskorostnoi obrabotky”, Tehnicheskie nauki, vol. 66, no. 12, pp. 172–175. www.research-journal.org
  8. Petrakov, Y.V. and Mackivsky, O.S. (2016), “Optimizacia pereferiynogo frezerovania kincevymi frezamy”, Journal of Mechanical Engineering NTUU “Kyiv Polytechnic Іnstitute”, vol. 76, no. 1, pp. 88–94. http://dx.doi.org/10.20535/2305‐9001.2016.76.61261
  9. Solid CAM. The Leaders in integrated CAM. https://www.solidcam.com/ru/imachining/
  10. GARANT Spravochnik po obrabotke rezaniem. www.garant-tools.com

Downloads

Published

2020-09-01

How to Cite

[1]
Y. V. Petrakov and Myhovych А. V., “IMachining technology analysis for contour milling”, Mech. Adv. Technol., no. 2(89), Sep. 2020.

Issue

Section

Up-to-date machines and the technologies of mechanical engineering