OPTIMIZATION OF SPATIAL FORM OF STREAMLINE BODIES OF SENSING ELEMENTS IN HYDRODYNAMIC LIQUID FLOW MEASURING TRANSDUCERS

І. В. Коробко

Abstract


Issues of selection of spatial geometric form of streamline bodies of sensing elements in hydrodynamic liquid flow measuring transducers were discussed basing on proposed integrated criterion of estimation. This criterion is grounded on effective interaction of measuring flow with transducer sensing element and gives high sensitivity of the system along with measuring accuracy at minimum impact on kinematic flow characteristics. Design objectives of form of streamline bodies of sensing elements in hydrodynamic liquid flow measuring transducers, their geometric forms and spatial arrangement regarding incoming flow have been determined. Main classes of streamline bodies which are used in flowmeters were investigated. Rational geometric forms of mentioned bodies and their spatial arrangement relatively to flow velocity vector, which create real background of synthesis of hydrodynamic flow measuring transducers with improved performance were analyzed. Keywords: measurement, flow rate, liquid, measuring transducers, optimization, sensing elements.

Keywords


measurement; flow rate; liquid; measuring transducers; optimization; sensing elements.

References


Korobko І. V. BULLETIN of National Technical University of Ukraine “Kyiv Politechnic Institute”. Series INSTRUMENT MAKING. 2012. Vyp. 44. pp. 111-117.

Braslavskij D.A, Petrov V.V. Tochnost' izmeritel'nyh ustrojstv. Moscow: Mashinostroenie, 1976. 312 p.

Al'tshul' A. D. Gidravlicheskie poteri na trenie v truboprovodah. Moscow-Leningrad.: Gosjenergoizdat, 1963. 256 p.

Idel'chik I. E. Spravochnoe posobie po gidravlicheskim soprotivlenijam. Moscow: Mashinostroenie, 1975. 543 p.

Grishanova І. A., Korobko І. V. Sistemi CAD/CAE. ANSYS FLUENT. Kyiv:Dіja LTD, 2012. 208 p.


GOST Style Citations


1. Коробко І. В. Оцінка ефективності вимірювальних перетворювачів витрати рідин і газів // Вісник НТУУ ”КПІ”. Серія приладобудування. – 2012. – Вип. 44. – С. 111 – 117.


2. Браславский Д.А, Петров В.В. Точность измерительных устройств. – М.: Машиностроение, 1976. – 312.


3. Альтшуль А. Д. Гидравлические потери на трение в трубопроводах. – М.-Л.: Госэнергоиздат, 1963. – 256 с.


4. Идельчик И. Е. Справочное пособие по гидравлическим сопротивлениям.– М.: Машиностроение, 1975. – 543 с.


5. Гришанова І. А., Коробко І. В. Системи CAD/CAE. ANSYS FLUENT. – К.: Дія ЛТД, 2012. – 208 с.





DOI: http://dx.doi.org/10.20535/2305-9001.2013.68.36252

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Mechanics and Advanced Technologies