GENERALIZED METHOD FOR SELECTING THE PARAMETERS OF PIPELINE VALVES WITH SEALING TYPE «METAL-TO-METAL»

E. Barilyuk, G. Zajonchkovskij

Abstract


The design approach to flat-type valve locks with feeding the medium onto the slide has been shown. The dependences for the optimal choice of the parameters the valve sealing elements which depend upon the characteristics of the working environment, as well as surface finish sealing surfaces were given. The features of the flat metal seal of the solenoid valve while feeding work flow on the valve slide were shown. A numerical simulation of deformation of the valve sealing was conducted. A picture of the valve slide and valve seat deformation during the application of the work flow onto the slide was obtained

Keywords


valve sealing elements; deformation; valve seat; valve slide; design; dependency

Full Text:

PDF

References


1. Astahov A. Ju. Obobshhennaja model processa izgotovlenija truboprovodnoj armatury povyshennogo kachestva. Himicheskoe i neftegazovoe mashinostroenie. 2002. No 1. P. 44-45

2. Belokobyl'skij S.V., P.M. Ogar, V.A. Tarasov Optimal'noe proektirovanie zatvorov truboprovodnoj armatury s uplotneniem «metall-metall» Sovremennye tehnologii. Sistemnyj analiz. Modelirovanie: nauch. zhurn. Irkut. gos. u-nt putej soobshhenija. 2008. No 5(17). P. 10-15

3. Shvets Yu. I., V. I. Livshits, A. K. Drevin Mechanism of operation of a gate valve having a self-sealing ring with an axial stop Chemical and Petroleum Engineering Volume 23, Number 4 (1987), 177-181, DOI: 10.1007/BF01149340

4. Ogar P.M., V.A. Tarasov, A.N. Cheremnyh Proektirovanie zatvorov truboprovodnoj armatury Sovremennye tehnologii. Sistemnyj analiz. Modelirovanie: nauch. zhurn. Irkut. gos. u-nt putej soobshhenija. 2007. No 3(15). P. 6-10

5. Gurevich D.F. Raschet i konstruirovanie truboprovodnoj armatury. 4–e izd. Moskow. Mashinostroenie, 1969. 887p.


GOST Style Citations


1.         Астахов А. Ю. Обобщенная модель процесса изготовления трубопроводной арматуры повышенного качества // Химическое и нефтегазовое машиностроение. – 2002. – №1 – С.44-45.

 

2.         С.В. Белокобыльский, П.М. Огар, В.А. Тарасов Оптимальное проектирование затворов трубопроводной арматуры с уплотнением «металл-металл» Современные технологии. Системный анализ. Моделирование: науч. журн. / Иркут. гос. у-нт путей сообщения. – 2008. - №5(17). –С. 10-15

 

3.         Yu. I. Shvets, V. I. Livshits, A. K. Drevin Mechanism of operation of a gate valve having a self-sealing ring with an axial stop Chemical and Petroleum Engineering Volume 23, Number 4 (1987), 177-181, DOI: 10.1007/BF01149340

 

4.         П.М. Огар, В.А. Тарасов, А.Н. Черемных Проектирование затворов трубопроводной арматуры Современные технологии. Системный анализ. Моделирование : науч. журн. / Иркут. гос. у-нт путей сообщения. – 2007. - №3(15). –С. 6-10

 

5.         Гуревич Д.Ф. Расчет и конструирование трубопроводной арматуры. – 4–е изд. – М.: Машиностроение, 1969. – 887с.





DOI: http://dx.doi.org/10.20535/2305-9001.2013.67.37755

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Mechanics and Advanced Technologies