MODELLING OF BOLTED JOINT FROM PCM IN THE PROGRAM FEMAP/NX NASTRAN

К. М. Рудаков, С. Н. Шукаев

Abstract


On the example of double-row double-shear bolted joint was carried out the adjustment of technique for calculation of bolted joints containing elements from a polymeric composite material (PCM). Calculations are as much as possible approximate to a real situation: the 3D-geometrical and finite-element model is used, the problem is considered as thermoelastic and contact, taking into account the loading, change of temperature, clearance/tightness size in the holes,  preload, friction in the joint, possible presence of defects while making holes in PCM. PCM was designed as 3D-orthotropic.

The new possibilities which have appeared in the new version of program complex FEMAP/NX Nastran are considered.

It is shown that bending of bolts under the influence of useful loading causes essential redistribution of stress both in bolts, and in plate made of PCM in a zone of contact with the bolt, with the occurrence of peak values of high level.

The conclusion is made that weak nonlinearity allows to make a limited number of calculations and to build interpolated approximations for intermediate situations. Thus it is possible to draw up reference materials needed in various industries, in particular, in aircraft engineering

Keywords


bolted joints; composite materials; finite-element modeling

References


1. Lawlor V.P., Stanley W.F., McCarthy M.A.. Characterisation of damage development in single-shear bolted composite joints. Journal of Plastics, Rubber and Composites. The Institute of Materials, London: UK, Vol. 31, No. 3, pp. 126-133.

2. Serensen S.V., Zajcev G.P. Nesushhaja sposobnost' tonkostennyh konstrukcij iz armirovannyh plastikov s defektami [Bearing ability of thin-walled constructions from reinforced plastics with imperfections] Kyiv: Nauk. dumka, 1982. 296 p.

3. Raschet na prochnost' detalej mashin: Spravochnik [Calculation on durability of details of machines: Reference book] I.A. Birger, B.F. Shorr, G.B. Iosilevich. Moscow: Mashinostroenie, 1979. 702 p.

4. Birger I.A., Iosilevich G.B. Rezbovye i flancevye soedinenija [Carving and butt Joints]. Moscow: Mashinostroenie, 1990. 365 p.

5. Prochnost, ustojchivost, kolebanija. Tom 2: Spravochnik [Durability, stability, oscillations. Volume 2: Reference book] Pod obshh. red. I.A. Birgera, Ja.G. Panovko. Moscow: Mashinostroenie, 1962. 463 p.

6. Timoshenko S., Woinowsky-Krieger S. Theory of Plates and Shells. Second Edition. New York Toronto London: McGRAW-HILL BGGK COMPANY, Inc., 1959.

7. Metodologija integrirovannogo proektirovanija i modelirovanija sbornyh samoletnyh konstrukcij [Methodology of the integrated projection and simulation of modular aircraft constructions] A.G. Grebennikov. Kharkov: Nac. ajerokosm. un-t "HAI", 2006. 532 p.

8. Johan Ekh, Joakim Schön, Gunnar Melin. Secondary bending in multi fastener, composite-to-aluminium single shear lap joints. Composites. Part B: Engineering, 2005. 36. pp. 195-208.

9. Mezhslojnye jeffekty v kompozitnyh materialah [Interlaminar effects in composite materials] Pod red. N. Pejgano. Per. s angl. Moscow: Mir, 1993. 346 p.


GOST Style Citations


1.            Lawlor V.P., Stanley W.F., McCarthy M.A.. Characterisation of damage development in single-shear bolted composite joints. Journal of Plastics, Rubber and Composites. The Institute of Materials, London, UK, Vol. 31, No. 3, pp. 126-133.

 

2.            Серенсен С.В., Зайцев Г.П. Несущая способность тонкостенных конструкций из армированных пластиков с дефектами. – К.: Наук. думка, 1982. – 296 с.

 

3.            Расчет на прочность деталей машин: Справочник / И.А. Биргер, Б.Ф. Шорр, Г.Б. Иосилевич. – М.: Машиностроение, 1979. – 702 с.

 

4.            Биргер И.А., Иосилевич Г.Б. Резьбовые и фланцевые соединения. – М.: Машиностроение, 1990. – 365 с.

 

5.            Прочность, устойчивость, колебания. Том 2: Справочник / Под общ. ред. И.А. Биргера, Я.Г. Пановко. – М.: Машиностроение, 1962. – 463 с.

 

6.            Тимошенко С.П., Войновский-Кригер С. Пластинки и оболочки / Пер. с англ. В.И. Контовта под ред. Г.С. Шапиро. – М.: Наука, 1966. – 635 с.

 

7.            Методология интегрированного проектирования и моделирования сборных самолетных конструкций / А.Г. Гребенников. – Харьков: Нац. аэрокосм. ун-т "ХАИ", 2006. – 532 с.

 

8.            Johan Ekh, Joakim Schön, Gunnar Melin. Secondary bending in multi fastener, composite-to-aluminium single shear lap joints. – Composites. Part B: Engineering, 2005. – 36. – s. 195-208.

 

9.            Межслойные эффекты в композитных материалах // Под ред. Н. Пейгано / Пер. с англ. – М.: Мир, 1993. – 346 с.





DOI: http://dx.doi.org/10.20535/2305-9001.2013.67.37871

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Mechanics and Advanced Technologies