ANALYSIS OF CURRENT MACHINE-TOOL COMPLEXES MACHINING IN ENGINEERING

Н. Р. Веселовська

Abstract


Purpose. Machine-tool complexes are high-quality the new level of the technical rigging and organization of production processes which are determined the use of not only the high-automated basic but also auxiliary technological equipment. In the article the analysis of the modern state of machine-tool complexes of tooling is considered in an engineer. Classification of machinetool complexes is offered.
Design/methodology/approach. Machining equipment is one of the main factors that determine the development of national economy. The effectiveness of using it directly affects the production of new machines for all industries, agriculture etc., which characterizes the level of society. Currently, no country produces all the necessary range of equipment, specializing only in some of its types. However, the level of modern manufacture requires the use of almost all kinds of machining and related auxiliary equipment. Therefore, review of trends and features tools not only causes concern, but is essential in developing and manufacturing modern machines. Findings. The classification of modern machine systems with qualitatively new level of technical equipment and organization of production processes, which are determined by using not only main process equipment, but also components such as automated
transport and storage subsystems, control and measurement and diagnostic equipment, computer, directly involved in the manufacturing process and provide automation features of technological, organizational, technical, organizational and economic control of production processes, creating a flexible manufacturing system. The modern complex machine, introduced in these systems on a given range of products unit of the main technological equipment, devices equipped with software control, replacement tools, products drives the initial material and intermediate products, devices, waste management, control and technological process and correction of quality products. It can operate in automatic mode and be integrated into the system of higher rank. Efficiency of machine systems is largely determined by the functional purpose of control equipment that is taken as a base for the main process equipment.

Keywords


machines; machine complex; technological equipment; production process; the classification performance

References


Agregatno-modul’ne texnologizne obladnannia [Aggregate-leading supplier of modular tehnologіchne]: w 3x z.[kol.avtoriv pid red. U.M. Kuzniecova].Kirovograd: Imeks LTD, 2004. I z. 442 p; II z. 286 p; ІІІ z. 507 p.

Bazrov B.M. Osnovy texnologii mazinostroenia [Fundamentals of Mechanical Engineering] Moscow: mechanical engineering, 2007, 736 p.

N.R.Veselovska , V.B.Strutyns’kyy, O.V.Zelins’ka [Prospects for flexible computer-integrated manufacturing systems, "Research Notes": Interuniversity Collection (in "Engineering Mechanics") Lutsk: Lutsk State Technical universytet]2009. no 25, pp.53-64.

Orlov A.I. Teoria priniatia rezeniy: [ Theory of Decision]. Moscow: „Мart”, 2004. 656 p.

Pavlenko I.I. Promyslovi roboty:osnovy rozraxunku ta proektuvannia [Industrial robots: the basics of calculating and designing]. Kirovograd: KNTU, 2007. 420 p.

Puxovskii E.S. Texnologizeskie osnovy gibkogo avtomatizirovanogo proizvodsva[Technological principles of flexible automated production] Кyiv: Vyza zkola, 1989. 240 p.

Sxirladze A.G., V.I.Sokolov Metallorezysie stanki s programnym uprawleniem i podgotovka program [Machine tools with program management and training programs]. Kharkov: XPI,1992. 255 p.

Sarin U.S. Stanki s zislovym upravleniem [numerically controlled machine tools. Moscow]. mechanical engineering, 1976. 149 p.

Spur G.N., Krauze F.L. Awtomatizirowannoe proektirowanie w mashinostroenii [Aided design in mechanical engineering. Moscow]: mechanical engineering, 1988. 648 p.


GOST Style Citations


1. Агрегатно-модульне технологічне обладнання : в 3-х ч. [кол. авторів під ред. Ю. М. Кузнєцова]. – Кіровоград : Імекс ЛТД, 2004. - I ч. - 442 с; II ч. - 286 с; ІІІ ч. - 507 с.

2. Базров Б. М. Основы технологии машиностроения / Б. М. Базров. - М.: Машиностроение, 2007. - 736 с.

3. Веселовська Н. Р. Перспективи розвитку гнучких комп’ютерно-інтегрованих виробничих систем / Н. Р. Веселовська, В. Б. Струтинський, О. В. Зелінська // “Наукові нотатки”: Міжвузівський збірник (за напрямом “Інженерна механіка”), Луцьк: Луцький державний технічний університет.-2009. - Випуск № 25, частина 1.- С.53-64.

4. Орлов А. И. Теория принятия решений: [учебное пособие] / А. И. Орлов. – М.: „Март”, 2004. – 656 с.

5. Павленко І.І. Промислові роботи:основи розрахунку та проектування/ І. І. Павленко. Кіровоград : КНТУ, 2007. – 420с.

6. Пуховский Е. С. Технологические основы гибкого автоматизированного производства / Пуховский Е. С. - К.: Выща школа, 1989. - 240 с.

7. Схиртладзе А. Г. Металлорежущие станки с программным управлением и подготовка программ / А. Г. Схиртладзе , В. И. Соколов. - Харьков.: ХПИ,1992. - 255 с.

8. Шарин Ю. С. Станки с числовым управлением. М.: Машиностроение, 1976. 149 с.

9. Шпур Г.Н., Краузе Ф. Л. Автоматизированное проектирование в машиностроении. - М.: Машиностроение, 1988. - 648с.





DOI: http://dx.doi.org/10.20535/2305-9001.2012.64.53337

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Mechanics and Advanced Technologies