ДЕЯКІ ОСОБЛИВОСТІ ПЛАСТИЧНОГО ДЕФОРМУВАННЯ МЕТАЛЕВИХ КОМПОЗИЦІЙНИХ МАТЕРІАЛІВ З АРМУЮЧИМИ КОМПОНЕНТАМИ ДОВІЛЬНОЇ ФОРМИ

В. А. Тітов, А. Д. Лавріненков, Н. К. Злочевська

Abstract


The finite-element simulation of deformation of composite Al–Steel with fibers of the different form was carried out. Circle, square, square turned on 450 (diamond-shaped is similar) were chosen as forms of fibers. Data of the intense-deformed condition of a composite, energy parameters of process were obtained. The structure of titanium alloy with eutectic ТіВn was investigated after pressing, influence of the basic metal flow on phase inclusions was estimated.

Keywords


The finite-element simulation of deformation of composite Al–Steel with fibers of the different form was carried out

GOST Style Citations


1. Krivov G. Aircraft production and technology in former USSR – Kiev, 1998. – p.261.

2. Кривов Г.А, Титов В.А., Лупкин Б.В. и др. Конструкции из металлических композиционных материалов – К.: Техніка, 1992. –224 с.

3. Мануйлов В.Ф., Смирнов В.И., Галкин В.И. Расчеты процессов деформации композиционных материалов – М.: Металлургия, 1992. – 208 с.

4. Титов В.А. Некоторые особенности технологической механики пластического деформирования конструкций из волокнистых композиционных материалов // Вестник НТУУ “КПИ”, серия – Машиностроение. – К.:,1998. –№33. – С.340–347.

5. Abaqus. Analysis User’s Manual.Volume 3: Materials. 6. Abaqus. Analysis User’s Manual.Volume 5: Prescribed Conditions, Constraints and Interections.





DOI: http://dx.doi.org/10.20535/2305-9001.2010.59.77601

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Mechanics and Advanced Technologies