CYCLOIDAL PLANETARY TRANSMISSION

Authors

  • Sławomir Bednarczyk Wroclaw University of Technology, Wroclaw, Poland

DOI:

https://doi.org/10.20535/2305-9001.2014.70.35251

Keywords:

cycloidal planetary gear (or cycloidal planetary transmission), test stand, gear value

Abstract

The design and operation principle of the cycloidal planetary transmission (or gearbox) has been presented. The gearbox combines the planetary and parallel mechanisms. The planetary mechanism makes a system of planetary gears and rollers, which determines the proper work of the gearbox. Its fundamental and most important element is the cycloidal planetary gear. The cycloidal tooth profile has been made basing on the equations elaborated by the Fluid Power Research Group at the Mechanical Engineering Faculty of Wroclaw University of Technology. A test stand with the measuring equipment and the results of the research on the gear value have been presented.

References

Bednarczyk S. Rozwój obiegowych przekładni cykloidalnych ukierunkowany na podniesienie efektywności maszyn (Development of cycloid planetary gear aimed at improving the efficiency of machines), (red.) Idzikowski A. Efektywność wykorzystania maszyn roboczych i urządzeń w przemyśle. Eksploatacja - Niezawodność - Bezpieczeństwo (Efficiency of working machines and equipment in the industry. Operation - Reliability - Security), Wyd. WZ PCz, Częstochowa 2013, p. 117-125.

Bednarczyk S. Influence of the planetary gear's geometry on the work safety of the cycloidal planetary transmission, (red.) Idzikowski A. Safety of machinery and equipment in the industry, Wyd. WZ PCz, Częstochowa 2013, p. 33-45.

Chmurawa M. Obiegowe przekładnie cykloidalne z modyfikacją zazębienia (Cycloidal planetary gears meshing modification), Politechnika Śląska, Zeszyty Naukowe Nr 1547, Gliwice 2002.

Stryczek J. Koła zębate maszyn hydraulicznych (Gear wheels of hydraulic machinery), Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw 2007, p. 30-144.

Stryczek J., Antoniak P., Banaś M., Bednarczyk S., Słodczyk D. Badanie skorygowanego modelu przekładni cykloidalnej Cyclofama. Etap III. Raport serii Sprawozdania nr S-047/11. Politechnika Wroclawska.

Stryczek J., Bednarczyk S., Biernacki K. Gerotor pump with POM gears: Design, production technology, research. Archives of Civil and mechanical Engineering (2014), http//dx.doi.org/10.1016/acme.2013.12.008.

Stryczek J., Bednarczyk S., Biernacki K. Strength analysis of the polyoxymethylene cycloidal gears of the gerotor pump. Archives of Civil and mechanical Engineering (2014), http//dx.doi.org/10.1016/acme.2013.12.005.

Zespół gerotorowy do maszyn hydraulicznych (Gerotor unit for hydraulic machines). Urząd Patentowy Rzeczpospolitej Polskiej, Patent PL 167103B1 z dnia 22.09.1995.

Downloads

Published

2014-12-22

Issue

Section

Статті