THE WEAR-RESISTANT COATINGS INFLUENCE ON THE CUTTING TOOL’S DURABILITY CHARACTERISTICS DURING THE CORROSION-RESISTANT MATERIALS TREATMENT
DOI:
https://doi.org/10.20535/2305-9001.2013.68.36147Keywords:
Cutting tools, pentagonal plates, corrosion-resistant steel, titanium nitride, whetting, wear, durability, coatings.Abstract
The problem of wear-resistant coatings influence on the cutting tool’s durability characteristics during the corrosion resistant materials treatment has been experimentally studied.
Purpose. The increase of the cutting tools with titanium nitride coatings resistant durability should be experimentally proved while chromium steels whetting.
Design/methodology/approach. The foregoing problem was solved the same way: during the experiment the investigation object was whetted by the special cutting instrument. Its cutting blade was fed by titanium nitride ions. Such decision gave us an opportunity to obtain the serious increase of the instrument’s durability.
Findings. It has been experimentally found that the usage of wear-resistant coatings, containing titanium nitride can increase such important characteristics of cutting tools as their reliability and durability.
Originality/ value. The developed experimental methodology and obtained methodology can be widely used for a great range cutting tools durability parameters investigation.
References
Vereshhaka, A.S. Rabotosposobnost' rezhushhego instrumenta s iznosostojkimi pokrytijami [The efficiency of the cutting tools with wearresistant coatings]. Moscow: Mashinostroenie, 1993 325p.
Vereshhaka, A.S. Rezhushhie instrumenty s iznosostojkimi pokrytijami [The cutting tools with wear-resistant coatings]. Moscow: Mashinostroenie, 1986. 192 p.
Macevityj, V.M. Pokrytija dlja rezhushhih instrumentov [The cutting tools coatings]. Kharkov: Vishha shkola. 1987. 128 p
Tabakov, V.P.Iznosostojkie pokrytija rezhushhego instrumenta, rabotajushhego v uslovijah nepreryvnogo rezanija [The wear-resistant coatings of the cutting tools, working during continuos cutting]. Ul'janovsk: UlGTU, 2007. 255p.
Tabakov, V.P.Formirovanie iznosostojkih ionno-plazmennyh pokrytij rezhushhego instrumenta [The forming of the ion coatings for the cutting tools]. Moscow: Mashinostroenie, 2008. 311 p.
Tabakov, V.P. Primenenie mnogoslojnyh pokrytij dlja povyshenija rabotosposobnosti rezhushhego instrumenta [The several lays coatings usage for the cutting tools efficiency increase]. STIN. 2005. No 1. p. 37 – 40.
Moskalev, A.P. Obrabotka hromistyh stalej [The chromium steels treatment]. Mikolaїv: The Journal of NUK, 2012. p.121 – 123.
Lymar' A.A. Povyshenie iznosostojkosti rezhushhego instrumenta v uslovijah tochenija hromistoj stali [The cutting tools durability increase during the chromium steels treatment] Mikolaїv: The Journal of NUK, 2012. p.144 – 145.
Granovskij G.I. Rezhushhie svojstva bystrorezhushhih stalej dispersionnogo tverdenija [The cutting ability of the dispersive solid high-speed cutting steels]. Vestnik mashinostroitelja, 1970, No 11. 420p.
Egorov S.V. Issledovanie obrabatyvaemosti rezaniem zharoprochnyh splavov [The cutting machinability of the superalloys investigation]. VNII CBTI, 1959. 364p.
Zoreva N.N.Issledovanie proizvoditel'nyh processov rezanija zharoprochnyh splavov [The cutting processes of superalloys investigations]. Trudy CNIITmash. 1961, No 17. 282p.
Krivouhov V.A.Obrabatyvaemost' rezaniem zharoprochnyh i titanovyh splavov [The superalloys and titanium alloys cutting efficiency]. Moscow: Mashgiz, 1961. 325p.
Malkin A.Ja. Obrabotka rezaniem vysokoprochnyh i zharoprochnyh materialov [The high-strength and heat-strength materials cutting treatment]. Moscow: NTOmashprom, 1961. 240p.
http://www.kzts.ru/articles/24 The new marks and constructions of cutting plates.
http://www.kzts.ru/articles/8 The cutting plates wear and its main types.
