EXPERIMENTAL RESEARCH OF CONSTRUCTIONAL NON-HOMOGENEOUS CILINDRICAL SHELLS FREE OSCILLATIONS

Authors

  • В. П. Шевченко Донецкий национальный университет, г. Донецк, Украина;, Ukraine
  • О. И. Власов Национальный университет кораблестроения им. адмирала Макарова, г. Николаев, Украина,
  • В. А. Каиров Национальный университет кораблестроения им. адмирала Макарова, г. Николаев, Украина,

DOI:

https://doi.org/10.20535/2305-9001.2013.68.36148

Keywords:

Free oscillation, Cylindrical shells, Reinforced ribs, Solid attached bodies, Holographic interferometry.

Abstract

Free oscillations of the thin, elastic reinforced cylindrical shells with attached solid bodies have been researched. The comparison analysis results of the obtained experimental data with the the results of calculation are also given.
Purpose. The experimental decision of the reinforcing stringers and attached solid bodies influence on the thin elastic nonhomogeneous shells constructions’ free oscillations forms and frequencies.
Design/methodology/approach. The results of thin elastic reinforced steel cylindrical shells with attached solid bodies free oscillations forms and frequencies experimental decision are given. The experimental methodology and the apparatus used in this experiment are also described. Amplitudes and frequencies of the investigated shells were obtained on the special vibration apparatus according to the resonance procedure by the usage of holographic interferometry method. The interferograms of several oscillation forms have been obtained. The interferograms’ contrast range was achieved by laser ray’s optical disk usage. It was also researched the influence of the construction features on the shells’ frequencies and amplitudes. The analysis of the obtained results is also attached.
Findings. The influence of reinforcing stringers and attached solid bodies on the shells’ oscillation forms and frequencies has been researched. The dependencies between oscillation frequencies and different oscillation forms wave numbers have been obtained too. The lowest and the medium frequencies’ spectrums were also investigated.
Originality/value. The developed methodology and obtained experimental data can be used for turbine engines frames and other shell constructions, which are used in modern technique, vibrodurability increase.

References

Vest Ch. Golograficheskaya interferometriya [The holographic interferometry] Мoscow: Мir, 1982. 504 p.

Ginzburg V.M. Golograficheskie izmereniya [Тhe holographic measurement] Moscow: Radio i svyaz’, 1981. 296 p.

Zarutskij V.A. O kompleksnyh jeksperimental’nyh issledovaniyah ustojchivosti i kolebanij konstructivno-neodnorodnyh obolochek (The complex research of constructional non-homogeneous shells oscillation and stability) The Applied Mechanics Journal. 2001. V.37, No 8 pp. 38-67.

Kozachok A. G. Golographicheskie metody issledovaniya v jeksperimental’noj mekhanike [Тhe methods of holographic research in the experimental mechanics] Мoscow: Mashinostroenie, 1984. 176 p.

Kairov A.S. An experimental study of the natural vibrations of supported shells. A.S. Kairov. Jour. of mathematical sciences. New York, 1995. 77, No 6. P.3533-3536.

Ostrovskij Yu. I. Golograficheskie interferentsionnye metody izmereniya deformatsij [Holographic interferential methods of deformation’s measurement] Мoscow: Nauka, 1988. 248 p.

Pisarenko G. S. Jeksperimental’nye metody v mehanike deformiruemogo tela [Experimental methods in the mechanics of deformed body] Кiev: Naukova dumka, 1986. 264 p.

Kabayasi A. Jeksperimental’naya mekhanika konstruktsij [The experimental mechanics of constructions] V.1 Мoscow: Мir, 1990. 616 p.

Published

2015-01-30

Issue

Section

Статті