Synthesis of cutting tooling for machining of holes based on the decomposition of part model

Authors

  • Володимир Миколайович Юхимчук National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • Віталій Анатолійович Пасічник National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine http://orcid.org/0000-0002-4422-6277

DOI:

https://doi.org/10.20535/2305-9001.2015.74.37635

Keywords:

synthesis, decomposition, cutting tool, machining of holes, operation sequencing method, CAPP

Abstract

Purpose. Development of new approaches to the synthesis of cutting tooling for machining of parts with a significant number of the holes.

Design/methodology/approach. Synthesis of the set of cutting tooling for machining of holes based on formalized description of elementary machined surfaces and cutting tools by logical rules. Description of machined surfaces based on the classification of elementary surfaces following main classification criteria: the type and position of creating curve, type surface, profile geometric thread and other geometric and technologic parameters.

Findings. This allows to synthesize the whole set of cutting tools and analyze them for the most effective machining process, and this will analyze and reduce the cost of manufacture of the product at the stage of technological design.

Author Biographies

Володимир Миколайович Юхимчук, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

аспірант каф. ІТМ ММІ НТУУ "КПІ"

Віталій Анатолійович Пасічник, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

зав. кафедри Інтегрованих технологій машинобудування Механіко-машинобудівного інституту НТУУ "КПІ"

References

1. Filonov I.P., Kozhuro L.M., Belyaev G.Y. Proektirovanie tehnologicheskih protsessov v mashinostroenii (Process Engineering in Mechanical Engineering), Minsk: Tehnoprint, 2003, 910 p.

2. Pasichnyk V.A., Yukhymchuk V.M. Informatsiyni zv’yazky dlya realIzatsiyi SAPR instrumentalnogo zabezpechennya mashinobudIvnogo vyrobnytstva [Information communication for the implementation of tool management CAPP in engineering production], Journal of the Sevastopol National Technical University – Mechanical Instrumentation and Transport, Sevastopol, 2013, no. 139, pp. 170-175.

3. MalleswariV.N., Valli P.M., Sarc M.M. Automatic Recognition of Machining Features using STEP Files, International Journal of Engineering Research & Technology, 2013, vol.2, no. 3, 11 p.

Published

2015-10-19

Issue

Section

Статті