THE METHODS OF THE INTENSIFICATION OF THE GTE DISCS AND SHAFTS HARD MATERIALS TURNING

Authors

  • Анатолий Иванович Долматов National Aerospace University «Kharkiv Aviation Institute», Kharkіv, Ukraine
  • Максим Александрович Курин National Aerospace University «Kharkiv Aviation Institute», Kharkіv, http://orcid.org/0000-0002-4178-2585
  • Виталий Владимирович Воронько National Aerospace University «Kharkiv Aviation Institute», Kharkіv,
  • Ирина Васильевна Скорченко National Aerospace University «Kharkiv Aviation Institute», Kharkіv, http://orcid.org/0000-0001-8143-7084

DOI:

https://doi.org/10.20535/2305-9001.2015.74.46595

Keywords:

technological process, efficiency, intensification, turning, machinability, combined methods, shaft, disc

Abstract

Purpose. Search for promising ways to intensify of the GTE discs and shafts hard materials turning. Analysis of the scientific advances in this field. Specification purpose of scientific research aimed at the intensification of turning.

Design/methodology/approach. The problem of increasing the efficiency of the GTE disks and shafts production through the intensification of the turning is still relevant because of the tendency of materials used in aircraft engine. With regard to the manufacturing processes of the gas turbine engines discs and shafts, the proportion of turning operations in the structure of some of them reaches 60%. The authors offer the phenomenological model of the intensification of difficult to cut materials turning and describe in short the basic methods of the cutting process improving. A review of the progressive combined machining methods of difficult to machine materials detects the presence of significant shortcomings. For a more elegant technical solution proposed the method of the direct control of contact and thermal phenomena for intensification of the difficult to cut materials turning.

Findings. In order to intensify the turning of the GTE discs and shafts necessary to investigate the possibility of implementing the method of direct control of contact and thermal phenomena during processing.

Originality/value. The phenomenological model of the intensification of difficult to cut materials turning is offered. The purpose of scientific research aimed at the intensification of turning is specified.

Author Biographies

Анатолий Иванович Долматов, National Aerospace University «Kharkiv Aviation Institute», Kharkіv

д-р техн. наук, профессор,  заведующий кафедрой технологий производства двигателей летательных аппаратов

Максим Александрович Курин, National Aerospace University «Kharkiv Aviation Institute», Kharkіv

канд. техн. наук, доцент, доцент кафедры технологий производства авиационных двигателей

Виталий Владимирович Воронько, National Aerospace University «Kharkiv Aviation Institute», Kharkіv

д-р. техн. наук, доцент, профессор кафедры технологии производства летательных аппаратов

Ирина Васильевна Скорченко, National Aerospace University «Kharkiv Aviation Institute», Kharkіv

Аспирантка кафедры технологий производства авиационных двигателей

References

Voron'ko V.V., Nauchnye osnovy avtomati-zirovannoj sborki aviacionnyh konstrukcij v uslovijah opytnogo i edinichnogo proizvodstva [Tekst]: dis. doktora teh. nauk: 05.07.02. Har'kov, 2014. 306 p. [V.D.].

Krymov, V.V. Dissertacija v vide nauchnogo doklada na soiskanie uchenoj stepeni doktora tehnicheskih nauk, Moscow 1999, str. 4

Eliseev, Ju. S. Sovremennye tehnologii kak neobhodimoe uslovie sozdanija naukoemkoj produkcii [Tekst]. Ju. S. Eliseev, V. V. Krymov. Dvigatel'. 2003. No 6 (30). P. 7–10.

Kurin, M. A. Obosnovanie kvantovoj pri-rody javlenij i processov, voznikajushhih pri akti-vacii zony mehanicheskoj obrabotki [Tekst]. M. A. Kurin. Otkrytye informacionnye i komp'-juternye integrirovannye tehnologii: sb. nauch. tr. Nac. ajerokosm. un-ta "HAI". Vyp. 61. H., 2013. P. 82 – 89.

Kolganov, I. M. Tehnologichnost' aviaci-onnyh konstrukcij, puti povyshenija. Chast'1 [Tekst]: uchebnoe posobie. I. M. Kolganov, P. V. Dubrovskij, A. N. Arhipov. Ul'janovsk: UlGTU, 2003. 148 p., il

Demin, F.I. Tehnologija izgotovlenija os-novnyh detalej gazoturbinnyh dvigatelej [Jelektronnyj resurs]: [uchebnik]. F. I. Demin, N. D. Pronichev, I. L. Shitarev; pod. obshh. red. prof. F. I. Demina. 2-e izd. Samara: Izd-vo SGAU, 2012. 1 jel. opt. disk (CD-ROM).

Sulima, A.M. Osnovy tehnologii proiz-vodstva gazoturbinnyh dvigatelej [Tekst]: uchebnik dlja studentov aviac. spec. vuzov. A.M. Sulima, A.A. Noskov, G.Z. Serebrennikov. 2-e izd., pererab. i dop.Moscow: Mashinostroenie, 1996. 480 p.: il.

Mozgovoj, V. F. Obespechenie parametrov kachestva polyh valov GTD tehnologicheskimi me-todami [Tekst]: dis. kand. tehn. nauk: 05.07.04. Mozgovoj Vladimir Fedorovich. Otkrytoe ak-cionernoe obshhestvo "Motor Sich". Zaporozh'e, 2002. 326l. Bibliogr.: l. 311-323.

Kurin, M.A. Issledovanie tehnologii pla-netarnogo glubinnogo shlifovanija ploskih po-verhnostej detalej aviacionnyh dvigatelej [Tekst]: dis. kand. tehn. nauk: 05.07.02; zashhi-shhena 13.05.2011; utv. 11.11.2011. Kurin Maksim Aleksandrovich. H., 2011. 179 p.

Shadskij, V.G. Tochenie detalej iz trud-noobrabatyvaemyh materialov pri vozdejstvii impul'sov jelektricheskogo toka [Tekst]: dis. kand. tehn. nauk: 05.03.01; Shadskij, Vladimir Gennadievich. Tula, 2009. 133 p.

Nasad, T. G. Vysokoskorostnaja lezvijnaja obrabotka trudnoobrabatyvaemyh materialov s dopolnitel'nymi potokami jenergii v zone reza-nija [Tekst]: dis. d. tehn. nauk: 05.03.01, 05.02.08; Nasad Tat'jana Gennadievna. Sara-tov, 2005. 399 p.

Kitel', Ch. Kvantovaja teorija tverdyh tel [Tekst]. Ch. Kitel'. Moscow: Nauka, 1967. 491 p.

Poduraev, V.N. Avtomaticheski reguli-ruemye i kombinirovannye processy rezanija [Tekst]: V.N. Poduraev. Moscow: Mashinostroenie, 1977

Jaroslavcev, V.M. Metodologija sovershenstvovanija tehnologij promyshlennogo proizvod-stva i razrabotki novyh metodov obrabotki. V.M. Jaroslavcev. Nauka i obrazovanie (MGTU im. N.Je. Baumana) (jelektronnyj zhurnal) RINC 2012. No 3 Rezhim dostupa: http://technomag.edu.ru/ 03, mart 2012

Jaroslavcev V.M. Rezanie s operezhajushhim plasticheskim deformirovaniem [Tekst]: ucheb. posobie po kursu «Perspektivnye tehnologii renovacii». V.M. Jaroslavcev. Moscow: Izd-vo MGTU im. N.Je. Baumana, 2010. 46 p.

Published

2015-10-26

Issue

Section

Статті