DOI: https://doi.org/10.20535/2305-9001.2011.63.55588

СПЕЦИФИЧНОСТИ МИКРОРЕЗАНИЯ КАМНЯ НА ОСНОВЕ ГРАНИТА

Л. Танович, П. Боянич, М. Попович, Г. Младенович

Abstract


In this work results are indicated researches, conducted on the Machine-building faculty in Belgrade in area of micro cutting of fragile materials. Cooperation is here analyzed between diamond grain and processed granite. The change of normal making force of cutting in the function of speed of cutting and depth of penetration at micro cutting of two variants of granites is experimentally set from the location of Serbia. On the basis of tracks on a granite and arising up cracks the critical depth of penetration of grain is set, which fragile destruction is at. The indicated researches must help optimization of process of polishing and polish, being dominant technologies of final treatment of granite.

Keywords


The indicated researches must help optimization of process of polishing and polish, being dominant technologies of final treatment of granite

GOST Style Citations


1. Lawn, B.R., Wilshaw, R, 1975, Indentation Fracture: principles and Applications, J. Mat. Sci, 10: 1049-1081.

2. Anton, R.J., Subhash, G., 2000, Dynamic Vickers Indentation of Brittle Materials, Wear, 239/1: 27-35.

3. Lawn, B.R., Swain, M.V., 1975, Microfracture beneath point indentations in brittle solids, J. Mat. Sci, 10: 113-122.

4. J.C. Conway, J.C., Kirchner, H.P.,1980, The mechanics of crack initiation and propagation beneath a moving sharp indentor. J. Mat. Sci. 15: 2879–2883.

5. Mishnaevsky, L.L.,1994 , Investigation of the cutting of brittle materials. Int. J. Mach. Tools Manuf., 34: 499–505.

6. Chiaia, B., Fracture Mechanisms Induced in a Brittle Material by a Hard Cutting Indenter, International Journal of Solids and Structures, 38/44-45: 7747-7768.

7. Labuz, J.F., Shah, S.P., Dowding, C.H., 1987, The Fracture Process Zone in Granite: Evidence and Effect, International Journal of Rock Mechanics and Mining Sciences, 24/4: 235-246.

8. Germanovich, L.N., Salganik, R.S., Dyskin, A.V., Lee,K.K., 1994, Mechanisms of Brittle Fracture of Rock with Pre-existing Cracks in Compression, Journal Pure and Applied Geophysics, 143 ; 117-149.

9. Abe, H., Saka, M., Ohba, S., 1992, Does the Process Zone Control Crack Growth?, Applied Mechanics Reviews, 45/8: 367- 376.

10. Xu, X., Li, Y., Malkin, S., 2001, Forces and Energy in Circular Sawing and Grinding of Granite, Journal of Manufacturing Science and Engineering, 123/1: 13-22.

11. Xie, J., Tamaki, J., 2007, Parameterization of Micro-Hardness Distribution in Granite Related to Abrasive Machining Performance, Journal of Materials Processing Technology, 186/1-3: 253-258.

12. Li, Y., Huang, H., Shen, J.Y., Hu, X,P., Gao, Y.S., 2002, Cost – Effective Machining of Granite by Reducing Tribological Interaction, Journal of Materials Processing Technology, 129/1-3: 389-394.

13. Huang, H., Li, Y., Shen, J.Y., Zhu, H.M., Xu, X.P., 2002, Micro- Structure Detection of a Glossy Granite Surface Machined by the Grinding Process, Journal of Materials Processing Technology, 129/1-3: 403-407.

14. Tanovic, Lj., Bojanic P., Puzovic, R., Milutinovic, M., 2011, Experimental Investigation of Micro-cutting Mechanisms in Granite Grinding, Journal of Manufacturing Science and Engineering, ASME Transactions, 133/2.





Copyright (c) 2019 Journal of Mechanical Engineering NTUU "Kyiv Polytechnic Institute"