ВПЛИВ ВИХІДНОЇ ПОРИСТОСТІ НА ВЕЛИЧИНИ ГРАНИЧНИХ СТУПЕНІВ ДЕФОРМАЦІЇ МІДНИХ ПОРОШКОВИХ ЗАГОТОВОК

Authors

  • Л. О. Рябічева Східноукраїнський національний університет імені Володимира Даля, м. Луганськ, Ukraine
  • Д. А. Усатюк Східноукраїнський національний університет імені Володимира Даля, м. Луганськ, Ukraine
  • Т. О. Рябовол Східноукраїнський національний університет імені Володимира Даля, м. Луганськ, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2011.62.69814

Keywords:

The influence of initial porosity of copper powder billets on values of ultimate degrees of deformation at uniaxial tension, compression and torsion has been investigated theoretically and experimentally

Abstract

The influence of initial porosity of copper powder billets on values of ultimate degrees of deformation at uniaxial tension, compression and torsion has been investigated theoretically and experimentally. The technique of determination of ultimate degrees of deformation for powder materials using results of compression test by sequential analysis of plastic equilibrium of billet’s points with Lyapunov’s functions method and their microstructures after deformations. The investigation results were implemented during development of production technologies of powder details.

Author Biographies

Л. О. Рябічева, Східноукраїнський національний університет імені Володимира Даля, м. Луганськ

д-р.техн.наук

Д. А. Усатюк, Східноукраїнський національний університет імені Володимира Даля, м. Луганськ

канд.техн.наук

Published

2016-07-15

Issue

Section

Original study