МЕТОДИ ПОВЕРХНЕВОГО ФІНІШНОГО ОБРОБЛЕННЯ ТВЕРДОСПЛАВНОГО РІЗАЛЬНОГО ІНСТРУМЕНТУ

Authors

  • В. С. Майборода National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • Н. В. Мініцька National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • Д. Ю. Джулій National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2011.62.73580

Keywords:

Тhe analysis of modern methods of surface finishing processing and cutting tools determine the most effective, in terms of high operational requirements put forward by industry to the modern tool

Abstract

Тhe analysis of modern methods of surface finishing processing and cutting tools determine the most effective, in terms of high operational requirements put forward by industry to the modern tool. It is rotined that one of perspective methods of finish consolidating treatment of many-sided throw-away hard-alloy plates is magnetic-abrasive treatment which is able to provide the simultaneous even forming of low roughness of workings surfaces, to favourable mikrogeometrii of necessary degree of work-hardening of superficial layer.

Author Biographies

В. С. Майборода, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

д-р.техн.наук, проф.

Н. В. Мініцька, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

канд.техн.наук, доц.

Д. Ю. Джулій, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

студ.

Downloads

Published

2016-07-13

Issue

No. 62 (2011)

Section

Original study

License

The authors reserve the right to authorship of the work and pass the journal right of first publication of this work is licensed under a Creative Commons Attribution License, which allows others to freely distribute the work published with reference to the authors of the original work and the first publication of this magazine.