REALIZATION OF FRAME-CONFIGURATIONS CONCEPTION OF MACHINE-TOOLS
DOI:
https://doi.org/10.20535/2305-9001.2016.78.84785Keywords:
machine-tools, parallel structure mechanisms, frame-configurationAbstract
The realization of machine-tools with parallel structure mechanisms frame-configurations conception is shown. Principles and laws of formation of less metal-consumption layouts of multifunctional processing equipment are formulated. Design procedure of the proposed structural formulas is defined. Techniques to perform directed search and design of new machinery, which corresponds to the high level technological purpose proposed and tested. The machine-tools samples implemented on the principles of the conceptionReferences
Kuznetsov, Yu.M., Dmytriev, D.O.and Dinevych, G.Yu. (2009), “Layouts of machine-tools with mechanisms of parallel structure”, Monograph red. Kuznetsov, Yu. М., PE Vyshemirskiy, V.S, Kherson, Ukraine.
Kuznetsov, Yu.M. and Dmytriev, D.O. (2009), Hybrid layout concept of machine-tools with parallel kinematic based on the modular principle”, Proceedings of international scientific conference "Technique, technology and systems Tekhsis", Plovdiv, Technical University Sofia, pp. 19-36.
Dmytriev, D.O. (2011), “Description configurations of machine-tools with the mechanisms of parallel structure”, Scientific journal "Technological Complexes",no 3, pp.18-30.
Kuznetsov, Yu.M. and Stepanenko, O.O. (2011), “Computer controlled table milling machines”, Scientific journal "Technological Complexes", no 3, pp. 12-15.
Firanskiy, V.B. (2011), Establishment of end-effector mobile platform for machine-tools with mechanisms of parallel structure. Ph.D, Thesis, K.
Dmytriev, D.O., Kuznetsov, Yu.M. and Dinevich, G.Yu. (2011), “Configuration principles of machine-tools with mechanisms of parallel structure”, Bulletin of Kherson National Technical University, Kherson: KNTU, Iss. №4(43), pp.28-32.
Kuznetsov, Yu.М. (2011), “The development of the design theory of new machine-tools configurations based on system analysis and synthesis of mechanisms of parallel structure”, Research report №2267-F, Research director, professor, NTUU "KPI", Kyiv, Ukraine.
Kuznetsov, Yu. and Shinkarenko, V. (2011), “The Genetic approach is the key to innovative Synthesis of complicated Technical Systems”, Journal of the Technical University at Plovdiv, Bulgaria, Fundamental Sciences and Applications, vol. 16, book 2, pp. 15 - 33.
Svidotstvo pro reyestraciu avtorskogo prava na tvir «Compyuterna programa «Tools App» – № 57913 від 29.12.2014 – Dergavna slugba intelektualnoi vlasnosti Ukrainu.
Kuznetsov, Y.N., Dmitriev, D.A., Keba, P.V. (2012), “Kinetic-Static analysis and inflexibility of drilling-milling machine-tool of pyramidal arrangement (DMMPA) with mechanisms of parallel structure (PKM)”, 12-th Anniversary International scientific Conference "UNITECH -12", Gabrovo, Bulgaria, 19-20 November, Vol. 2.
Kuznetsov, Y., Podolsky, M., Dmitriev, D. and Rusanov, S. (2013), “Dynamic analysis of support lathe based parallel mechanisms of type "heksahlayd”, Interuniversity collection "Scientific notes", Lutsk, no 41, Vol. 2. pp. 69 – 73.
Kuznetsov, Y.M., Danilchenko, Y.M., Shevchenko, O.V., Dmitriev, D.O. and Voloshyn, V.N. (2009), “Stvorennya vuzliv i mehanizmiv dlya nadshvydkisnoi i preceziynoy obrobky na verststah novogo pokolinnya z paralelnou kinematukou”, Naukovyj tvir. Svidotstvo pro reestraciu avtorskogo prava na tvir № 28940, 27.05.2009.
Kuznetsov, Yu.M., Dmytriev, D.O., Keba, P.V.and Piven, S.M. (2016), “Frame-configurations conception of machine-tools with parallel structure mechanisms”, Materialy MNTK «Prohresyvna tekhnika, tekhnolohiya ta inzhenerna osvita», pp. 236 -238.
