SIMULATION OF INTERNAL DYNAMIC PROCESSES IN HYDRAULIC PILOT-OPERATED RELIEF VALVES

Authors

  • Д. Г. Олехнович Belarussian National Technical University, Minsk, Belarus
  • М. И. Жилевич Belarussian National Technical University, Minsk, Belarus

DOI:

https://doi.org/10.20535/2305-9001.2012.66.38661

Keywords:

pilot-operated relief valves, dynamics, mathematical modeling, internal processes

Abstract

Relief valves are integral part of almost any hydraulic power system; therefore special attention is given to ensure stable operation of these elements. The purpose of this work is to study internal dynamic processes in hydraulic pilot-operated relief valves and define key parameters affecting dynamic performance and operational stability of the examined valves.

Modeling involves creating a design scheme and a mathematical model for the specific valve. Flow balance equations for the selected model nodes and motion equations of valve's moving elements were formulated.

The study revealed that internal dynamic processes in hydraulic pilot-operated relief valves are influenced by the following parameters: size of the poppet valve orifice, value of the valve's enclosed volume andpump capacity. Moreover, analysis results showed that developed model is most sensitive to changes in the size of the poppet valve orifice.

Developed mathematical model can be used as an effective tool for selecting rational dimensions for hydraulic pilot-operated relief valves in order to provide specific dynamic properties

Author Biography

М. И. Жилевич, Belarussian National Technical University, Minsk

к.т.н., доц.

References

1. Avtomatizirovannoe proektirovanie mashinostroitel'nogo gidroprivoda [Computer-aided design of machinery hydraulics]. I.I. Bazhin [and others]; under the general editorship of S.A. Ermakova. Moscow: Mashinostroenie, 1988, 312 p.

2. Bogdan N.V. Modelirovanie i raschet dinamiki gidroprivodov [Modeling and calculation of hydraulic dynamics]. N.V. Bogdan, V.P. Avtushko, M.I. Zhilevich.Herald of the National Academy of Sciences of Belarus, 2003, No.3, pp. 87-94.

3. Metljuk N.F. Dinamika pnevmaticheskih i gidravlicheskih privodov avtomobilej [Dynamics of pneumatic and hydraulic car actuators].N.F. Metljuk, V.P. Avtushko. Moscow: Mashinostroenie, 1980, 231 p.

4. Popov D.N. Dinamika i regulirovanie gidro- i pnevmosistem [Dynamics and control of hydraulic and pneumatic systems]: university textbook. D.N. Popov.2nd issue. Moscow: Mashinostroenie, 1987, 464 p.

5. Bartosh P.R., Kishkevich P.N. Raschet predohranitel'nyh klapanov [Calculation of safety relief valves], study guide. Minsk: 2001, 60 p.

6. Sitnikov B.T., Matveev I.B. Raschet i issledovanie predohranitel'nyh i perelivnyh klapanov [Calculation and study of safety and excess flow valves]. Moscow: Mashinostroenie, 1972, 129 p.

7. Poljakova L.E., Jampilov S.S., Blekus V.G., Uheev G.Zh., Il'ina M.V. Gidravlicheskij raschet ob’emnogo gidroprivoda [Hydraulic calculation of fluid power drive], study guide. Ulan-Udje: Izd-vo VSGTU, 2002, 20 p.

Published

2015-03-04

Issue

Section

Статті