BENDING OF THREE-LAYER PLATES WITH A RIGID FILLER ON ELASTIC BASE

Authors

  • В. В. Ярмолюк The National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv, Ukraine
  • С. І. Трубачев The National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2012.64.44358

Keywords:

bending, three-layer plate, the rigid filler, the elastic base

Abstract

Sandwich plates are widely used in various branches of industry. Thus, the calculation of sandwich structures under static loads is an actual task. Elastic rectangular sandwich plate with uncompressible filler lying on elastic foundation is considered. Kirchhoff’s hypotheses are accepted for description of base layers kinematics. The foundation reaction is described by Winkler’s model. The presence of rigid diaphragm impeding the relative shift of layers is presumed on the contour of the plate. The variational Lagrange’s principle is used for receiving differential system of equilibrium equations. The numerical calculation of th sandwich plate finite element package Femap-NASTRAN. Was determined by the dependence of bending stiffness of the base. Were given advice on the choice of stiffness on the deflection. The analytical solutions of the problem have been found and their numerical analysis has been conducted

References

Gorshkov A.G., Starovojtov Je. I., Jarovaja. A.V., Mehanika sloistyh vjazko-uprugoplasticheskih jelementov konstrukcij. (The mechanics of layered visco-elastic structural elements). Moscow: Fizmatlit, 2005, 576 p.

Starovojtov, Je. I. Vjazkouprugoplasticheskie sloistye plastiny i obolochki. (Viscoelastoplastic laminatedplates and shells). Gomel: BelGUT, 2002, 344 p.

Starovojtov Je.I., Jarovaja A.V., Leonenko D.V., Deformirovanie trehslojnyh jelementov konstrukcij na uprugom osnovanii. (Deformation of sandwich structural elements on elastic foundation). Moscow: FIZMATLIT, 2006, 379 p.

Pleskachevskij Ju. M., Starovojtov Je. I., Jarovaja A. V. Deformirovanie metallopolimernyh sistem. (Deformation of Metal-Polymer Systems). Minsk: Bel. Navuka, 2004, 386 p.

Published

2015-08-31

Issue

Section

Статті