CALCULATION OF THE PARAMETERS FOR DISC SAWS THAT USE METHOD OF RUNNING FOR TOOLMAKING WITH UNEVEN TOOTH PITCH
DOI:
https://doi.org/10.20535/2305-9001.2014.72.34798Keywords:
Uneven, Tooth, Pitch, Saw, CutterAbstract
Purpose. To get uneven tooth pitch of saws it necessary to solve the problem of manufacturing special tools of the second order . Such an instrument will be disc shaped cutter . This cutter must also have an uneven tooth pitch .
Design/methodology/approach. As practice shows disc shaped cutter with uneven tooth pitch can handle saws with the required quality parameters and without much difficulty. Due to the uneven of angular pitch of the disc shaped cutter is no longer necessary to manufacture cutting tools with different profiles of teeth. This simplifies the manufacture of the tool. This article describes the features of the calculation of the angular pitch of the teeth of the second -order tool, as well as their location, for workpieces with uneven tooth pitch.
Findings. The technique of calculation that is shown in this article, depending on the uneven tooth pitch, and several other parameters allows easily calculate the angles between the teeth of the cutting tool.
Also shows the principle of breakdown of the teeth by step according to the different number of teeth.
Originality/value. This method allows to calculate the parameters of the instrument for its manufacture and use in actual production conditionsReferences
1. Babenko A.E., Ravskaja N.S., Boronko O.A., Loroh R. Opredelenie kriterija dinamicheskogo sostojanija diskovoj pily. (Definition of criteria of the dynamic state of the saw blade). Kiev: Vestnik NTUU «KPI», Mashinostroenie, Vyp. 33, 1998, 6 p.
2. D.V. Kozhevnikov, V.A. Grechishnikov, S.V. Kirsanov, V.I. Kokarev, A.G. Shirtladze. Rezhushhij instrument. (Cutting tools). Moscow: Mashinostroenie, 2007, 528 p.
3. Rodin P.R. Osnovy proektirovanija rezhushhih instrumentov. (Basics of designing cutting tools.). Kiev: Vishha shkola, 1990, 424 p.
