ANALYTICAL DESCRIPTION OF TURBINE TYPE FLOWRATE TRANSDUCER BALANCING FORCE

Authors

  • И. В. Коробко National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv,, Ukraine
  • А. В. Писарец National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv,, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2014.70.35254

Keywords:

turbine type flow rate transducer, sensitive element, hydrodynamic balancing

Abstract

The problem of creating devices with turbine primary flow rate transducers, where the sensitive element is balanced by the flow of the liquid, which prevents the rapid deterioration of the sensor support and the loss of the metrological characteristics, is considered. The authors proposed the construction of a primary turbine flow rate transducer with a hydrodynamic sensitive element balancing; a characteristic feature is the presence of the sensitive element axial movement to determine that the analytical dependence, thereby creating a coherent mathematical model generalizes the considered converter. The method of determining the force balancing sensitive element in a wide range of flow rates is described. The influences of the dimensions, number and location of installation of fairings towards the flow axis, the distance between them, as well as liquid hydrodynamic and physical characteristics, on the transducer parameters were studied.

References

Boshnjak L.L., Byzov L.N. Tahometricheskie rashodomery (Tachometric flowmeters). Leningrad: Mashinostroenie, 1968. 212 p.

Boshnjak L.L., Byzov L.N. Izmerenie malyh rashodov zhidkostej (Measurement of low flow liquid). Moscow-Leningrad: Mashgiz, 1961.80p.

Bobrovnikov G.N., Kamyshev L.A. Teorija i raschet turbinnyh rashodomerov (Theory and calculation of turbine flowmeters). Moscow: Izd-vo standartov, 1978.128 p.

Boshnjak L.L. Izmerenija pri teplotehnicheskih issledovanijah (Measurements at heat engineering research). Leningrad: Mashinostrenie, 1974. 448 p.

Janbuhtin I.R., Kozlov L.I., Denisov A.V. Moskow: Trudy instituta NIITeplopribor. 1968. No1 – 2. pp. 65 – 76.

Korobko І. V., Pisarec A. V. BULLETIN of National Technical University of Ukraine “Kyiv Politechnic Institute”. Series INSTRUMENT MAKING. 2002. Vyp. 42. Tom 2. pp.42 – 45

Korobko І. V., Pisarec A. V. BULLETIN of National Technical University of Ukraine “Kyiv Politechnic Institute”. Series Priladobuduvannja. 2003. Vip. 25. pp. 89 – 94.

Korobko І. V., Pisarec A. V. BULLETIN of National Technical University of Ukraine “Kyiv Politechnic Institute”. Series INSTRUMENT MAKING. 2003. Vyp. 44. pp. 233 – 235.

Pisarec A. V., Korobko І. V Promyshlennaja teplotehnika. 2006. No 4.pp. 84 – 89.

Pisarec A. V., Korobko І. V. Sistemi obrobki іnformacії. Metrologіja ta vimіrjuval'na tehnіka. Vipusk. 2011. No 9 (96).pp. 150 – 154.

Pisarec A. V., Korobko І. V Vіbracії v tehnіcі ta tehnologіjah. 2005. № 2 (40). pp. 67 – 70.

Pat. № 3416 Ukraїna, MPK (2004) G 01 F 1/10. Turbіnnij vitratomіr. І. V. Korobko, A. V. Pisarec, P. K. Kuz'menko. - u2004021392. Zajavl. 26.02.04. Opubl. 15.11.2004. Bjul. No 11. 3 p.

Rabinovich E.Z. Gidravlika (Hydraulics.). Moscow: Fizmatgiz, 1961. 408 p.

Skochinskij A.A., Ksenofontova A. I., Harev A. A., Idel'chik I. E..Ajerodinamicheskoe soprotivlenie shahtnyh stvolov i sposoby ego snizhenija (Aerodynamic drag shafts and ways to reduce it). Moscow-Leningrad: Ugletehizdat, 1953. 364 p.

Published

2014-12-22

Issue

Section

Статті