УПРАВЛЕНИЕ ПАРАМЕТРАМИ ОБОРУДОВАНИЯ ДЛЯ ШТАМПОВКИ ОБКАТЫВАНИЕМ ДЛЯ ОБЕСПЕЧЕНИЯ ЭФФЕКТИВНОСТИ ПРОТЕКАНИЯ ТЕХНОЛОГИЧЕСКОГО ПРОЦЕССА

Authors

  • С. П. Гожий National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • А. В. Клиско National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • Р. Н. Ландар National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2011.63.55396

Keywords:

The structural charts of mechanism of rolling-off with regulation of angle of slope are offered

Abstract

Quality of wares which are made stamping with a rolling-off is determined the kinematics parameters of process. In the article approaches of creation of presses are considered with the managed kinematics parameters. Most effective is a management the angle of slope of axis of active instrument. New technological possibilities of method are at the same time arrived at. The structural charts of mechanism of rolling-off with regulation of angle of slope are offered.

Author Biographies

С. П. Гожий, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

д-р техн.наук

А. В. Клиско, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

асп.

Р. Н. Ландар, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

маг.

Published

2015-12-04

Issue

Section

Статті