STUDY OF ENERGY LOSSES OF INDUSTRIAL HYDRAULIC SYSTEMS

Authors

  • О. П. Губарев National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv, Ukraine
  • О. В. Левченко National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv,
  • Х. Самандиджан National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv,

DOI:

https://doi.org/10.20535/2305-9001.2014.72.36836

Keywords:

energy efficiency, energy losses, stroke, duty cycle, hydraulic drive system, trajectory of the energy flow

Abstract

Study of energy losses of industrial hydraulic systems.

Purpose. The analysis of the energy flow trajectory by hydraulic system with a large number of drives.

Design/methodology/approach.It was performed the analysis with regard to the factors that affect the level of energy efficiency of industrial hydraulic drive.

Findings. It was done review of typical industrial hydraulic drive systems with a large number of actuators. It was showed the sequence of the system and the switching sequence of electromagnets of hydraulic directional valves.

Originality/value. It was considered the trajectory of energy flow in separate stroke and are determined energy losses at each time step. The magnitude of the energy loss in each of the devices on the line of the trajectory of the energy flow was determined. The balance of power on levels of devices in the structure of the functional modules of the hydraulic system was showed. It was achieved verifying circuit path of the energy flow in the cyclic industrial hydraulic drive system and are identified areas for further research

Author Biographies

О. П. Губарев, National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv

д.т.н., проф.

О. В. Левченко, National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv

к.т.н., доц.

References

1. Belenkov Ju.A., Nejman V.G. Nadezhnost' obemnyh gidroprivodov i ih jelementov (Reliability of hydraulic systems and their components). Moscow: Mashinostroenie, 1977. 168 p.

2. Skrickij V.Ja., Rokshevskij V.A. Jekspluatacija promyshlennyh gidroprivodov (Exploitation of industrial hydraulic systems). Moscow: Mashinostroenie, 1984. 176 p.

3. Timofeev V.N. Jekonomicheskaja jeffektivnost' mashin: osnovnye faktory, rezervy povyshenija, upravlenie: [monografija] (Economic efficiency of machines: the main factors that increase the reserves, management) Har'kov, izd-vo «Osnova» pri Har'kovskom gosudarstvennom universitete, 1990. 156 p.

4. Jahno O.M., Pastushenko S.I. Povyshenie jeffektivnosti ispol'zovanija jenergii v gidravlicheskih mehanizmah sel'skohozjajstvennyh mashin (Improving energy efficiency in hydraulic mechanisms of agricultural machinery) Vseukraїns'kij naukovo-tehnіchnij zhurnal “Promislova gіdravlіka і pnevmatika”. 2004. Vip. 3. P. 92-98.

5. Levchenko O.V. Pіdvishhennja efektivnostі roboti sistem gіdroprivodіv ciklіchnoї dії (Improving the efficiency of hydraulic cyclic systems) Journal of mechanical engineering National technical university of Ukraine “KPI”. 2012. No 65. Pages 125-130.

6. Levchenko O.V. Osoblivostі ocіnki efektivnostі bagatoprivіdnoї gіdravlіchnoї sistemi Naukovі pracі DNTU. Serіja: "Gіrnicho-elektromehanіchna". 2012. Vip. 2(24). pp. 142-149.

Published

2015-01-30

Issue

Section

Статті