ESTIMATION DEFORMABLE MATERIAL OF BLANKS IN COLD ROLLING

Authors

  • І. В. Гунько Vinnitsa National Agrarian University, Vinnitsa, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2012.64.44370

Keywords:

stress-strain state, free surface, stress state parameter, ultimate strain, accumulated damage, the scalar model, the tensor model, rolling

Abstract

Object of research are the processes of formation by rolling. Subject of research is the stress-strain state of the free surface of the workpiece material in the process of rolling. The purpose of this paper is to construct models of limit strains for points of the free surface of the workpiece in the process of rolling. Method for determination of stress-strain state at the free surface of the workpiece during forge-rolling was developed. Stress-strain state of the material is determined using experimental and analytical method. This method is based on the construction of an analytical relationship between the logarithmic strain components by of the experimental data. Scalar and tensor models of the limiting state material of the free surface of the workpiece during forge-rolling are developed. The analytical models of the limit state are a generalization of known analytical models for the points of the free surface of the workpiece. These results represent an independent value for the analysis of the quality of the surface layer in the areas of free surface of the workpiece during rolling. It is also important for to set up simulation of plastic deformation of the entire workpiece by finite element method.

References

Skriabin S.A., Gunko I.V., Chajka D.S., Bubnovska I.A. Opredelenie vozmozhnosti pojavlenija defektov pri shtampovke pokovok s primeneniem processa valcovki podgotovitel'nyh ruch'ev. Obrabotka materialov davleniem (Determining the possibility of defects at stamping forgings with rolling preparatoryprocess streams. Materials working by pressure). Kramatorsk, 2010, no. 3(24), pp. 76—81.

Ogorodnikov V.A. Ocenka deformiruemosti metallov pri obrabotke davleniem (Evaluation of deformability of metals under pressure treatment). Kyiv: Vywa shkola, 1983. 200 p.

Matvijchuk V.A., Aliev I.S. Sovershenstvovanie processov lokal'noj rotacionnoj obrabotki davleniem na osnove analiza deformiruemosti metallov (Improving the processes of local rotary forming based on an analysis of deformability of metals: a monograph). Kramatorsk, 2009. 268 p.

Mykhalevych V.M. Tenzornі modelі nakopichennja poshkodzhen (Tensor model of accumulation of damages). Vinnitsa, 1998. 195 p.

Dobranjuk Ju.V., Alіeva L.І., Mykhalevych V.M. Modeljuvannja za dopomogoju programnogo kompleksu DEFORM 3D napruzhenodeformovanogo stanu na bіchnіj poverhnі cilіndrichnogo zrazka pіd chas torcevogo stisnennja. Obrabotka metallov davleniem (Simulation stress-strain state on the side of a cylindrical specimen during mechanical compression using the software package DEFORM 3D), Kramatorsk, 2010, no. 4(25), pp. 3—10.

Mihalevich V.M., Kraevskij V.A., Dobranjuk Ju.V. Modelirovanie predelnyh deformacij na svobodnoj poverhnosti pri osesimmetrichnoj osadke. Progressivnye metody i tehnologicheskoe osnawenie processov obrabotki metallov davleniem (Simulation of marginal deformations on the free surface for the axisymmetric upsetting. Advanced techniques and technological equipment of metal forming: Math. International. scientific and engineering. conf.). St. Petersburg, 2009, pp.108-112.

Mihalevich V.M., Lebedev A. A., Dobranjuk Ju.V. Modelirovanie plasticheskogo deformirovanija cilindricheskogo obrazca pri torcevom szhatii. Probl. Prochnosti (Modeling the plastic deformation of the cylindrical sample at face-end compression. Problems of strength), 2011, no. 6, pp. 5––22.

Mihalevich V. M., Alieva L. I. Approksimacija krivyh predel'noj deformacii splajn-funkcijami. Obrabotka metallov davlenie (Approximation curves of marginal deformation of spline functions. Materials working by pressure), Kramatorsk, 2010, no. 3(24), pp. 3—10.

Mikhalevich V.M., Dobranuk Y.V., Kraevsky V.A., Mikhalevich O.V. Dependence of plastic ultimate strain from a friction at end faces at axisymmetric compression. Bulet. Inst. Politehnic Din Iasi., Iasi, 2008, Tomul LIV(LVIII), Fasc.3-4, pp.49-53.

Skriabin S. A., Gun'ko I. V., Bubnovska I. A. Issledovanie neravnomernosti deformacii i raspredelenija temperaturnogo polja v ochage deformacii s uchetom razvitija deformacii vo vremeni. Tehnologicheskie sistemy: nauchno-tehnicheskij zhurnal (The study of deformation and the distribution of temperature field in the deformation with the development of strain in time. Technological Systems: Scientific and Technical Journal). Kyiv, 2011, no.1(54), pp. 50-53.

Published

2015-08-31

Issue

Section

Статті