ИНФОРМАЦИОННО-ПАРАМЕТРИЧЕСКАЯ МОДЕЛЬ ПРОЦЕССА МЕХАНООБРАБОТКИ ДЛЯ ПОСТРОЕНИЯ СИСТЕМЫ ДИАГНОСТИКИ

Authors

  • В. А. Румбешта National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • Н. А. Симута National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • В. С. Подвысоцкая National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2011.63.56131

Keywords:

For the construction of such system developed informatively self-reactance model of process of tooling which allows to choose the effective initial parameter of diagnostic of process of treatment

Abstract

An important production task is in-process examined on tooling of details of machines and devices on machine-tools with NC with the use of necessary for reliability of such process of the systems of the technical diagnosing of his quality. For the construction of such system developed informatively self-reactance model of process of tooling which allows to choose the effective initial parameter of diagnostic of process of treatment. An analysis over of intercommunication of initial parameters of tooling and example of construction of the system of technical diagnostics is brought on the basis of design of the technical process state with the use of monitoring oscillation – acoustic emission.

Author Biography

В. А. Румбешта, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

д-р техн.наук

Published

2015-12-16

Issue

Section

Статті