SIMULATION OF TEMPERATURE DISTRIBUTION IN TITANIUM MELT CONSIDERING ITS FLOW

Authors

  • Юрій Олександрович Цибрій National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • Георгій Геннадійович Грабовський State Scientific and Production Corporation «Kyiv Institute of automatics», Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2014.72.28347

Keywords:

electron-beam melting, intermediate capacity, temperature distribution, titanium melt

Abstract

The mathematical model of the titanium melt heating in electron-beam plant intermediate capacity considering its hydrodynamic flow is developed. The temperature distribution in the intermediate capacity at different melt flow rates based on this model using the finite-element analysis program ANSYS Fluent is obtained. It is established that the temperature of the molten metal in the central zone of intermediate capacity significantly exceeds the temperature in the peripheral zone, an increase in the flow velocity of the melt leads to a decrease in the temperature and an increase in the degree of temperature distribution in the intermediate capacity uniformity. The optimum melt flow speed range in order to ensure the necessary temperature and its uniformity distribution in the intermediate capacity is offered

Author Biographies

Юрій Олександрович Цибрій, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

аспірант НТУУ "КПІ"

Георгій Геннадійович Грабовський, State Scientific and Production Corporation «Kyiv Institute of automatics», Kyiv

д.т.н., проф.

References

1. Paton B.E., Trigub N.P., Ahonin S.V., Zhuk G.V. , Jelektronno-luchevaja plavka titana [Electron beam melting of titanium]. Kyiv: Naukova dumka, 2006. 248 p.

2. Paton B.E., Trigub N.P.,Kozlitin D.A., Ahonin S.V. and others, Jelektronno-luchevaja plavka [Electron beam melting] Kyiv: Naukova dumka, 1997. 265 p.

3. S. V. Ladohin, N. I. Levickij, V. B. Chernjavskij, T. V. Lapshuk, V. G. Shmigidin, L. A. Kravchuk, A. S. Gladkov , Jelektronno-luchevaja plavka v litejnom proizvodstve [Electron beam melting in foundry]. Kyiv: Stal', 2007. 626 p.

4. Minakova A.B., Minakov V.N., Minakov N.V., Trefilov V.I., O strukture proizvodstva titanovoj produkcii: mirovoj opyt i realizacija v Ukraine [About the structure of titanium production: world experience and implementation in Ukraine] Kyiv: 1998, 22 p. (Prepr./Frantsevich Institute for problems of materials science NAS Ukraine, 98-4).

5. B.E. Paton, N.P. Trigub, S. V. Ahonin, Jelektronno-luchevaja plavka tugoplavkih i vysokoreakcionnyh metallov [Electron beam melting of refractory and high-reactive metals]. Kyiv: Naukova dumka, 2008. 312 p.

6. Bolgarskij A.V., Muhachev G.A., Shhukin V.K., Termodinamika i teploperedacha. Uchebn. Dlja vuzov. Izd.-e pererab t dop. [Thermodynamics and Heat Transfer. Textbook for high schools. Redesigned and supplemented addition] Moscow: Vysshaja shkola, 1975. 495 p.

7. Kostenko V. I., Pap P.A., Kalinjuk A. N., Koval'chuk D.V., Kondratij N.P., Chernjavskij V.B., Rekonstrukcija jelektronno-luchevoj ustanovki TІSO-15M . Sovremennaja jelektrometallurgija., 2007. no 3. pp. 24-25.

8. Mushegjan V. O., Tarasjuk A. A, Formirovanie optimal'nyh rezhimov jelektronno-luchevogo nagreva pri plavke molibdena v ustanovke MV-1. Sovremennaja jelektrometallurgija., 2010. no 4. pp. 16-19.

Published

2014-12-24

Issue

Section

Статті