INVESTIGATION OF THE DYNAMICS OF SCREW SECTIONAL CONVEYORS

Authors

  • А. Є. Дячун Тернопільський національний технічний університет імені Івана Пулюя, Тернопіль, Україна, Ukraine
  • О. Л. Ляшук Тернопільський національний технічний університет імені Івана Пулюя, Тернопіль, Україна,
  • Р. О. Любачівський Тернопільський національний технічний університет імені Івана Пулюя, Тернопіль, Україна,

DOI:

https://doi.org/10.20535/2305-9001.2013.69.28984

Keywords:

screw working organ, sections of, moment, screw conveyer

Abstract

The dynamics of screw conveyors has been investigated as multi mechanical model. Theoretical basis and methods for determining the design, kinematic, dynamic, technological, functional, performance and other parameters and characteristics of sectional screw working bodies presented in the literature. But, variable loads, which arise in screw conveyers does not taken into account, and the moments of inertia of the system elements not discussed in detail. During the screw sectional conveyer work, loads, which cause break down it’s working elements, arise when relative rotation angle between two adjacent sections exceeding allowable, as determined from conveyor parts condition of strength. It was found that the relative rotation angle value at dynamic loads greater than the value at static loads. The construction of flexible sectional conveyer with bolted ellipse connections of the sections was represented. The system of nonlinear differential equations was composited, which were solved by Runge-Kutt numeral method with using a computer program with built graphic dependences of the dynamic loads in different regimes of the conveyer work. Graphical dependencies of relative rotation angles changes of screw conveyor sections, and of relative speed of rotation of sections in time due to different modes of loads, based on theoretical studies were built. Dependencies of dynamic moments between screw conveyor sections with a progressive load.

References

Grigor'ev A.M., Preobrazhenskij P.A. Gibkie shneki [ Flexible augers] Kyiv: Znanie, 1967. p.245.

Mehanizmi z gvintovimi pristrojami [Mechanisms with screw devices] Gevko B.M., Danil'chenko M.G., Rogatins'kij R.M., Pilipec' M.І., Matvijchuk A.V. L'viv: Svit: 1993. p208.

Rogatins'kij R.M. Mehanіko-tehnologіchnі osnovi vzaєmodії shnekovih robochih organіv іz sirovinoju sіl's'kogospodars'kogo virobnictva: dis. na zdobuttja vchenogo stupennja dok. tehn. nauk: cpec. 05.20.01, «Mehanіzacіja sіl's'kogospodars'kogo virobnictva», 05.05.05 «Pіdjomno-transportnі mashini» (Mechanical and technological bases of interaction screw the working bodies of the raw agricultural) Rogatins'kij Roman Mihajlovich. Kyiv. 1997. p.502.

German H. Shnekovye mashiny v tehnologii FRG [Screw machines in technology of FRG] Leningrad: Mashinostroenie, 1975. p.148.

Rjahovskij O.A., Ivanov S. S. Spravochnik po muftam [The directory by couplings] Lvov: Politehnika, 1991. p.384.

Malashhenko V.O. Mufti privodіv. Konstrukcії ta prikladi rozrahunku. Navchal'nij posіbnik. V.O. Malashhenko [Coupling of drives. Constructions and examples of calculation] L'vіv: Vidavnictvo Nacіonal'nogo unіversitetu «L'vіvs'ka polіtehnіka», 2006. p.196.

Published

2014-11-07

Issue

Section

Статті