PERSPECTIVES USE OF LASER-ULTRASONIC FINISHING AND STRENGTHENING OF THE SURFACES DETAILS

Authors

  • В. В. Джемелінський The National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv, Ukraine
  • Г. Ю. Конашевич The Cherkassy State Technological University ", Cherkasy, Ukraine
  • Д. А. Лесик The National Technical University of Ukraine "Kyiv Polytechnic Institute", Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2012.64.44368

Keywords:

laser-ultrasonic processing, processing without melting, microhardness, micro - nanorelief

Abstract

The requirements to mechanical properties of machine parts are high today. That’s why the use of traditional techniques sometimes don’t allow us to receive the necessary quality parameters of the surface layer. In this connection modern manufacture uses the hybrid and combined technologies. The combined techniques can provide high accuracy, productivity, durability of parts due to the improvement parameters of the surface layer. Investigate the influence of the combined laser-ultrasonic processing on change relief and microhardness of metal products and determine the possibility of this method. The prospects of a combined laser-ultrasonic finishing and strengthening of surface finishing of parts, where the action is implemented on a metal surface of the laser-ultrasonic sources of energy that can not only improve the parameters of the surface layer of workpieces, but also to optimize the performance of modified surfaces to create competitive products. Use laser - ultrasonic action for finishing - strengthening processing will allow not only substantially improving the parameters of superficial layer of processing details but also optimization specifications of the modified surfaces to create competitive products. Propounded pilot test of the combined method of laser-ultrasonic finishing-strengthening processing suggest it can use to handle critical details of different purpose.

References

Majorov V. S. Lazernoe uprochnenie metallov (Laser strengthening of metals). V sbornike lazernye tehnologii obrabotke materialov: sovremennye problemy fundamental'nyh issledovanij i prikladnyh razrabotok. Pod. red. V.Ja. Panchenko. Moscow: Fizmatlit, 2009, 1-31 pp.

Golovko L. F. Lazerni tehnologii' ta komp’juterne modeljuvannja (Laser technology and computer modeling). Kyev: Vistka, 2009, 296 p, Bibliogr.: pp. 239 – 248.

Kovshov A. N. Nazarov Ju. F., Ibragimov I. M. Osnovy nanotehnologii v tehnike (Fundamentals of Nanotechnology in Engineering). Ucheb. posobie. Moscow: Izd – vo MGOU, 2006, 190-195 pp.

Poljak M. S. Tehnologija uprochnenija (The technology of strengthening). Tehnol. Metody uprochnenija V 2 t. T. 2. Moscow: «L.V.M. – SKRIPT», «MASHINOSTROENIE», 1995, 688 p.

Tokarev V. N., Homich V. Ju., Shmakov V. A., Jamwikov V. A. Zhurnal: Fizika i ximija obrabotki materialov, 2008, no 4, 15-25 pp.

Marinescu, N. I.; Ghiculescu, D., Jitianu, G. & Seritan, G. Improvement of technological parameters at surface finiahing though laser beam machining. (The 6th International DAAAM Baltic Conference Industrial Engineering). Tallinn, Estonia, 24-26 April 2008.

Zavestovskaja I. N. Kvantovaja jelektronika, 2010, t.40, no 11, 487-489 pp.

Dudnikov I. A. Ukrai'ns'kyj mizhv. nauk.-tehn. zbirnyk «Avtomatyzacija vyrobnychyh procesiv u mashynobuduvanni ta pryladobuduvanni» Vyp. no5, Lviv. Vydavn. Lvivskoi politehniky, 295-298 pp.

Jebeling V. O. Obrazovanie struktur pri neobratimyh processah. Vvedenie v teoriju dissipativnyh struktur. (The formation of structures in irreversible processes. Introduction to the theory of dissipative structures) Moscow: Mir, 1979, 279 p.

Dzhemelins'kyj V. V., Dzhemelinska L. V., Lesyk D. A. Sposib lazerno-ultrazvukovoi finishnoi obrobky [Method of laser-ultrasonic finishing processing]. Patent Ukrainy no 60662 U. 25.06.2011.

Published

2015-08-31

Issue

Section

Статті