INCREASED STRENGTH CHARACTERISTICS CUTTING TOOL BY APPLICATION COOLING AND LUBRICATING THE TECHNOLOGICAL ENVIRONMENT

Authors

  • А. С. Каиров National University of Shipbuilding named after admiral Makarov, Nikolaev, Ukraine
  • А. А. Лимарь National University of Shipbuilding named after admiral Makarov, Nikolaev,
  • С. Н. Анастасенко National University of Shipbuilding named after admiral Makarov, Nikolaev,

DOI:

https://doi.org/10.20535/2305-9001.2014.70.35255

Keywords:

cutting tool, penhtaedral plate design solution, cutting fluids, cooling, load capacity, modified cutter, durability characteristics

Abstract

The theoretical study of lubricating technological environments feedings ways, the impact of their usage on the cutting tools characteristics is given. The constructive solutions of lubricating technological environments feedings are also presented. The foregoing design gives an opportunity to increase the durability of the cutting tool.

Purpose. The main aim of this work is the development of new constructive solutions,giving an opportunity for the strength characteristics of the cutting tool mprovement by the usage of the flow cooling technology environments by means of pentagonal interchangeable cutting inserts.

Design/methodology/approach The foregoing problem was solved by a single-circuit cooling system of a modified cutter with interchangeable disposable plates with creation. The proposed cutter is more functional due to its higher technological efficiency, strength incensement for more then 1.5 times in comparison to other constructional decisions of the homogeneous cutters. Such methodology of cutters; design with special cooling effects should be used rotational cutting tools with polygonal plates as well as with other types of cutting tools.

Findings. The developed design solution gives an opportunity for the cooling environments flow through the channels in the cutting tool modified technology usage. without access to the cutting zone, representing the cooling system of interconnected functional modified pentagonal cutter with interchangeable disposable plates.

Originality/ value. The modified cutter with closed single loop cooling is more universal and functional then other obtained cutters’ design decisions, that leads to its satisfied industrial application for the rotational cutting tools with polygonal cutting plates

Author Biographies

А. С. Каиров, National University of Shipbuilding named after admiral Makarov, Nikolaev

д.т.н., проф.

С. Н. Анастасенко, National University of Shipbuilding named after admiral Makarov, Nikolaev

к.т.н., доц.

References

1. A.s. 1333536 SSSR. Rezets s vnutrennim ohlazhdeniem [A.s. 1333536 SSSR The cutting tool with the internal cooloing]: I.D. Ahmetzyanov, V.V. Bedunkevich, A.Yu. Zorin, V.I. Ilin (SSSR). 4908803/08; zayavl. 07.02.91; opubl. 23.05.93. Byul. No 19.

2. A.s. 319389 SSSR. Rezets s vnutrennim ohlazhdeniem [A.s. 319389 SSSR The cutting tool with the internal cooloing]: N.P. Mihaylov, V.P. Hupovka, G.L. Morozova (SSSR). 3392311/25-08; zayavl. 21.01.82; opubl. 15.10.83., Byul. No 38.

3. A.s. 1504062 SSSR. Rezets s vnutrennim ohlazhdeniem [A.s. 1504062 SSSR The cutting tool with the internal cooloing]: A.R. Mirzakandov (SSSR). 4294503/22-08; zayavl. 06.08.87; opubl. 30.08.89., Byul. No 32.

4. A.s. 795883 SSSR. Rezets s vnutrennim ohlazhdeniem [A.s. 795883 SSSR The cutting tool with the internal cooloing]: V.P. Zaytsev (SSSR). 2735459/25-08; zayavl. 13.03.79; opubl. 15.01.81., Byul. No 2.

5. Pat. 46967 UkraYina. RIzets dlya podachI bagatokomponentnih mastilno-oholodzhuvalnih tehnologIchnih seredovisch v zonu rizannya [The cutting tool for the multicomponent cooling suppliying substantions]: V.P. Petrovskiy, G.V. Fedorenko u200907877; zayavl. 27.07.2009; opubl. 11.01.2010, Byul. No 1.

6. Pat. 61745 Ukraina. Rizets [The cutting tool]: S.V. Kovalevskiy, T.O. Fedyuk u201100643; zayavl. 20.01.2011; opubl. 25.07.2011, Byul. No 14.

7. Limar, A.A. Povyishenie iznosostoykosti rezhuschego instrumenta v usloviyah tocheniya hromistoy stali [The cutting tool durability incensement during the chromed steal cutting ]: MaterIali II mizhnarodnoi naukovo-tehnichnoikonferentsii. Mikolaiv: NUK, 2012. pp.144 - 145.

8. Reznikov A.N., Reznikov L.A, Teplovye processy v tehnologicheskih sistemah [The heat processes in the technological systems]: Moscow: Mashinostroenie, 1990. 288p.

9. Moskalev, A.P. Limar A,A., Obrabotka hromistyh staley [The cromed steals cutting]: MaterIali II mіzhnarodnoi naukovo-tehnIchnoi konferentsіi Mikolaiv: NUK. 2012. pp. 121 - 123.

10. Stanchuk E.A., Gripas E.A., Stanchuk A.I., Pribyish.V.N., Proizvoditlnaya obrabotka zharoprochnyh splavov [The manufactural cutting of steals with high heat durability]: materialy itrudyi institute vyipusk 18 Nikolaev: NKI. 1974. pp.54-57.

11. Entelisa S.G., Berlinera E. M., Smazochno-ohlazhdayuschie tehnologicheskie sredstva dlya obrabotki metallov rezaniem: Spravochnik [The cooling substantions for the metal cutting. Guide-book. Moscow: Mashinostroenie, 1986. 352 p.

12. Vereschaka, A.S. Rabotosposobnost rezhuschego instrumenta s iznosostoykimi pokryitiyami [The high durable cutting tool reliability]: monografiya. pod red. I.S Forsten. A.S Vereschaka. Moscow: Mashinostroenie, 1993. 325p.

13. Hudobin L.V., Babichev A.P., Bulyizhev E.M.. Smazochno-ohlazhdayuschie tehnologicheskie sredstva i ih primenenie pri obrabotke rezaniem: [The technological cooloing substetntions and their usage during the cutting process]: Spravochnik Moscow. Mashinostroenie, 2006. 544 p

14. Moskalev, A.P., Limar A.A. Obrabotka hromistyih staley [The cromed steals cutting]: Materiali II mizhnarodnoi naukovo-tehnichnoi konferentsii. Mikolaiv: NUK. 2012. pp.121-123.

15. Sizyiy Yu.A., Stepanov M.S. Vliyanie davleniya podachi SOZh na nagrev zagotovok I pri vreznom shlifovanii [The cooling substance suppliment influence on the detail’s heating processes]: Visnik natsionalnogo tehnichnogo universitetu «KPI» H.: NTU «KPI». 2005. pp. 210-214.

16. Egorov, S.V., Volkov S.I., Issledovanie obrabatyivaemost irezaniem zharoprochnyh splavov [The high heat durability steals cutting process investigation]; VNII TsBTI, 1959. 364p.

17. Vasilev A.V., Hamidullova L.R. Vozdeystvie smazyivayuschih ohlazhdayuschih zhidkostey v usloviyah predpriyatiy mashinostroeniya i metody iego snizheniya [The influence of the cooling substantions on the machinebuilding manufacturing process]: Izv. Samar. NTs RAN. 2006. T. 8. No 4. p. 1171-1176.

18. Lima rA.A. Vliyanie iznosostoykih pokritiy na stoykostnyie harakteristiki rezhuschego instrumenta pri obrabotke trudnoobrabatyivaemyh korrozionnostoykih materialov [The influence of the durability increasing substances on the reliability characteristics of the cutting tools during the hardly manufacturing mateals cutting process]: Visnik natsionalnogo tehnichnogo universitetu «KPI». HIV: NTU «KPI». 2013. pp.116-121.

Published

2014-12-23

Issue

Section

Статті