Principles of designing high-speed chucks

Authors

  • Фарук Вахид Ель-Дахаби National Conservatory of Arts and Crafts, Beirut, Lebanon, Lebanon
  • Юрий Николаевич Кузнецов NTU of Ukraine "Kiev Polytechnic Institute", Kiev, Ukraine
  • М. Т. Хазим Lebanese University, Faculty of Engineering, Tripoli, Lebanon

DOI:

https://doi.org/10.20535/2305-9001.2014.72.36634

Keywords:

high- speed clamping chuck, morphological analysis, centrifugal

Abstract

Purpose. To study the change of radial force of a clamp of the chuck when processing on the lathe with CNC at high speeds. Influence of centrifugal forces and methods of their compensation. To offer rational algorithm for design of high-speed clamping cartridges.
Design/methodology/approach. Proceeding from already known recommendations about creation of the new clamping chucks, and also from results of the analytical researches, the flowchart of design consisting of five levels was made. At each stage these or those technical recommendations are considered. The choice of the best options is made based on the system morphological approach. 
Findings. The technique (algorithm) of design and calculation of high speed clamping chuks, recommendations about rigidness increase is developed. New high-speed clamping chucks were offered after using the algorithm.

References

Kuznecov Yu.N., Drachev O.I., Luciv I.V., Shevchenko A.V., Voloshin V.N. Zazhimnye mehanizmy i tehnologicheskaja osnastka dlja vysokojeffektivnoj tokarnoj obrabotki [Clamping mechanisms and industrial equipment for highly effective turning], Monograf, Staryj Oskol: TNT, 2014. 480p.

Kuznecov Ju.N., Sidorko V.I, Vachev A.A. Povyshenie dinamicheskogo kachestva sistemy patron-detal' prutkovogo avtomata [Increase of dynamic quality of system chuck-detail of the bars CNC machine], Stanki i instrument. 1987. No12, p.13-15.

Kuznecov Ju.N. Analiz dinamicheskoj sistemy shpindel'-patron-detal' tokarnogo avtomata [Analysis of dynamic system spindle-chuck-detail of the turning CNC machine], Vestnik mashinostroitelja. 1990. No8, p. 42-47.

Kuznecov Yu.N., Jel'-Dahabi F.V. Issledovanie silovyh harakteristik zazhimnogo patrona, rabotajushhih na vysokih chastotah vrashhenija [Research of the force characteristics of the clamping boss working at high frequencies of rotation], Vestnik NTUU «KPI», Mashinostroenie. 2004. No45p.

Kuznecov Yu.N., Voloshin V.N. Silovye harakteristiki tokarnyh patronov s pozicionnymi bagataprofil'nimy zazhimnymi jelementami [Force characteristics of turning cartridges with positional bagataprofilnima clamping elements], Vestnik TGTU, 2004. Tom 9, No3. P. 43-48.

Orlikov M.L., Kuznecov Yu.N. Proektirovanie zazhimnyh mehanizmov avtomatizirovannyh stankov [Design of clamping mechanisms of automated machines], Monograf, Moskow: Mashinostroenie, 1977. 142 p.

Pronikov A.S., Borisov E.I., Bushuev V.V. i dr. pod obshh. red. A.S. Proektirovanie metallorezhushhih stankov i stanochnyh system [Design of metal-cutting machines and machine systems], Spravochnik-uchebnik. V 3-h tomah. T 2. Raschet i konstruirovanie uzlov i jelementov stankov.

Kuznecov Yu.N., Vachev A.A., Sjarov S.P., Crvenikov A.C. pod red. Kuznecova Yu. N. Samonastraivajushhiesja zazhimnye mehanizmy [The self-setting-up clamping mechanisms], Spravochnik. Kiev: Tehnika; Sofija: Gos. izd-vo ”Tehnika”, 1988-222 p.

Strutinskij V.B. Matematicheskoe modelirovanie processov i sistem mehaniki [Mathematical simulation of processes and systems of mechanics], Monograf: Zhitomir: ZhITI, 2001. 616p.

Published

2015-02-04

Issue

Section

Статті