ДЕЯКІ ОСОБЛИВОСТІ ПЛАСТИЧНОГО ДЕФОРМУВАННЯ МЕТАЛЕВИХ КОМПОЗИЦІЙНИХ МАТЕРІАЛІВ З АРМУЮЧИМИ КОМПОНЕНТАМИ ДОВІЛЬНОЇ ФОРМИ

Authors

  • В. А. Тітов National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • А. Д. Лавріненков National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • Н. К. Злочевська National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2010.59.77601

Keywords:

The finite-element simulation of deformation of composite Al–Steel with fibers of the different form was carried out

Abstract

The finite-element simulation of deformation of composite Al–Steel with fibers of the different form was carried out. Circle, square, square turned on 450 (diamond-shaped is similar) were chosen as forms of fibers. Data of the intense-deformed condition of a composite, energy parameters of process were obtained. The structure of titanium alloy with eutectic ТіВn was investigated after pressing, influence of the basic metal flow on phase inclusions was estimated.

Author Biographies

В. А. Тітов, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

д-р техн.наук, проф.

А. Д. Лавріненков, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

асп.

Н. К. Злочевська, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

ас.

Downloads

Published

2016-09-15

Issue

No. 59 (2010)

Section

Original study

License

The authors reserve the right to authorship of the work and pass the journal right of first publication of this work is licensed under a Creative Commons Attribution License, which allows others to freely distribute the work published with reference to the authors of the original work and the first publication of this magazine.