To the question about the calculation of the ultrasonic step-up transformer of vibrating speed with the developed radiance surface

Authors

DOI:

https://doi.org/10.20535/2521-1943.2019.85.164346

Keywords:

ultrasonic transformers of vibrational speed, calculation of a step concentrator, disk radiating surface, ultrasonic spraying in a thin layer, performance of ultrasonic spraying

Abstract

The paper considers the issues of calculating the acoustic dimensions of ultrasonic stepwise composite transformers of oscillatory velocity with a developed radiation surface. The analysis of the effect on the transformation ratio of the features of oscillations of a flat developed disk surface radiation is presented. It is shown that the geometrical dimensions of the disk surface of radiation set a certain mode of surface oscillations and are associated with the requirements of specific technological processes. This requires an adjustment of the calculated value of the transformation ratio and the acoustic dimensions of the step of a smaller diameter of the composite speed transformer in order to preserve the resonant frequency. It is shown that with transformation ratios of more than 4, the one-dimensional computational model gives a significant error, since does not take into account bending vibrations of the disk surface radiation.

References

  1. Lugovskoy, A. and Chukhrayev, N. (2007), Ul'trazvukovaya kavitatsiya v sovremennykh tekhnologiyakh: K. Vidavnicho–polígrafíchniy tsentr «Kyivskyi universytet», Ukraine.
  2. Goljaminа, I. (1979), Ul'trazvuk. Malen'kajaj enciklopedija [Ultrasound. Small encyclopedia], Sovetskajaj enciklopedija, Moskow, Russia.
  3. Kumabe, D. (1985), Vibratsionnoye rezaniye, Per. s yap. L. Maslennikova in I.I. Portnova, V.V. Belova (ed.), Mashinostroyeniye, Moskow, Russia.
  4. Khmelev, V. and Shalunov, A. (2010), Ul'trazvukovoye raspyleniye zhidkostey, monografiya, Alt. gos. tekhn. un-t, BTI., Izd-vo Alt. gos. tekhn. un-ta, Biysk, Russia.
  5. Lugovskoy, A.F., Fesich, V.P., Zilinskiy, A.I. and Lavrinenkov, A.D. (2017), Povysheniye proizvoditel'nosti ul'trazvukovykh raspyliteley, “Mechanics and Advanced Technologies”, vol. 80, no. 2, pp. 113-122, http://dx.doi.org/10.20535/2521-1943.2017.80.111878
  6. Luhovskyi, O. and Lyashok, A.V. (2011), “Ulʹtrazvukove rozpylennya ridyny u mekhatronnykh systemakh shtuchnoho mikroklimatu”, Promyslova hidravlika i pnevmatyka, vol. 34, no. 4, pp. 20-25.
  7. Eknadiosyants, O. (1970) “Polucheniye aerozoley”, Fizicheskiye osnovy ul'trazvukovoy tekhnologii. in. L.D. Rozenberga (ed.), Nauka, Moskow, Russia.
  8. Feng H., Barbosa-Cánovas G.V. and Weiss J. (Eds.), (2011), Ultrasound Technologies for Food and Bioprocessing, Food Engineering Series. – Sрringеr Science+Business Media.
  9. Gao S., Lewis G. D., Ashokkumar M. and Hemar Y., "Inactivation of microorganisms by low-frequency high-power ultrasound: 2. A simple model for the inactivation mechanism," Ultrason. Sonochem., vol. 21, pp. 454 -460.
  10. Lependin L.F. (1978), Akustika, Ucheb. Posobiye dlya vuzov, Vyssh. shkola, Moskow, Russia.
  11. Zelyakh E.V. (1951), Osnovy obshcheĭ teorii lineĭnykh elektricheskikh skhem,Izd-vo AN SSSR, Moskow, Russia.

Downloads

Published

2019-04-14

How to Cite

[1]
O. Lugovskyi, A. Movchanyuk, and V. Fesich, “To the question about the calculation of the ultrasonic step-up transformer of vibrating speed with the developed radiance surface”, Mech. Adv. Technol., no. 1(85), pp. 49–56, Apr. 2019.

Issue

No. 1(85) (2019)

Section

Original study

License

Copyright (c) 2020 Mechanics and Advanced Technologies

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The ownership of copyright remains with the Authors.
 
Authors may use their own material in other publications provided that the Journal is acknowledged as the original place of publication and National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” as the Publisher.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work