The methodology of aggregative evaluation of aircraft cooperative production project efficiency

Authors

  • Svitlana Georgievna Kryvova National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Institute of Mechanical Engineering, Department of Dynamics and Strength of Machines and Strength of Materials , Ukraine https://orcid.org/0000-0002-5677-3729
  • Alexander Evgenyevich Zubanyov "Ukrainian Research Institute of Aviation Technology" JSC, Ukraine https://orcid.org/0000-0001-8649-1450
  • Artem Mykolayovych Rudko "Ukrainian Research Institute of Aviation Technology" JSC, Ukraine https://orcid.org/0000-0002-9142-1681
  • Serhii Ivanovich Trubachev National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Institute of Mechanical Engineering, Department of Dynamics and Strength of Machines and Strength of Materials , Ukraine https://orcid.org/0000-0002-7349-9426

DOI:

https://doi.org/10.20535/2521-1943.2021.5.3.244795

Keywords:

cooperative production; aviation industry; technical and economic indices of aircraft cooperative production project.

Abstract

   The overview of modern forms and trends of international cooperation in aviation industry is presented.

   The actuality of choice of cooperation schemes and main indices values of cooperation production for the aviation industry of Ukraine is determined.

   The analysis of dependences of key technical and economic indices of the Project of creation of aircraft cooperative production is carried out and the aggregative methodology of estimation of aircraft cooperative production project efficiency is offered.

References

  1. D. Mocenco, "Supply Chain Features of the Aerospace Industry Particular Case Airbus and Boeing," Scientific Bulletin - Economic Sciences, University of Pitesti, vol. 14(2), pp. 17–25, 2015.
  2. A.C. Rosello, H.-J. Steenhuis, "Offset agreements in Aerospace", in Proc. of the IAMOT, 2018, Aston University, Birmingham, UK.
  3. A.I. Pogorletskiy et al., International business. Theory and practice: Textbook for bachelors. A.I. Pogorletskiy and S.F. Sutyrin Ed., Moscow: Publishing house Yurayt, 2017.
  4. S.G. Krivova and V.M. Shulepov, "Regarding the optimization of procedures for participation in international research programs in field of aircraft production", Technological systems, No. 88/3, pp. 85–91, 2019. DOI: https://doi.org/10.29010/88.12
  5. J.E. Cassiolato, R. Bernardes and H. Lasteres, Innovation Systems in the South: a case study of Embraer in Brazil. Paper
  6. prepared for UNCTAD-DITE investment policy and capacity-building branch. New York and Geneva, United Nations, 2002.
  7. Paulo S. Figueiredo, S. Gutenberg, R. Sbragia, "Risk Sharing Partnerships with Suppliers: The Case of EMBRAER Risk Sharing Partnerships with Suppliers: The Case of EMBRAER Parcerias de Risco com Fornecedores: O Caso da EMBRAER",
  8. Journal of Technology Management and Innovation, Vol. 3, Issue 1, pp. 27–37, 2008.

Downloads

Published

2021-12-27

How to Cite

[1]
S. Kryvova, A. Zubanyov, A. Rudko, and S. Trubachev, “The methodology of aggregative evaluation of aircraft cooperative production project efficiency”, Mech. Adv. Technol., vol. 5, no. 3, pp. 275–281, Dec. 2021.

Issue

Vol. 5 No. 3 (2021)

Section

Aviation Systems and Technologies

License

Copyright (c) 2021 Кривова Світлана Георгіївна, Зубаньов Олександр Євгенійович, Рудько Артем Миколайович, Трубачев Сергій Івановіч

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The ownership of copyright remains with the Authors.
 
Authors may use their own material in other publications provided that the Journal is acknowledged as the original place of publication and National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” as the Publisher.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work