Application of Laser Thermocycling to Improve the Quality of Plasma Wear-Resistant Coatings

Authors

  • Leonid Golovko National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Y.O. Paton Institute of Materials Science and Welding / Department of Laser Systems and Advanced Technologies, Ukraine https://orcid.org/0000-0001-7803-0312
  • Oleksii Kaglyak National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Y.O. Paton Institute of Materials Science and Welding / Department of Laser Systems and Advanced Technologies, Ukraine https://orcid.org/0000-0002-5602-543X
  • Viktor Romanenko National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», Y.O. Paton Institute of Materials Science and Welding / Department of Laser Systems and Advanced Technologies, Ukraine http://orcid.org/0000-0002-3230-5664
  • Mykhaylo Bloshchytsyn National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», E.O. Paton Institute of materials science and welding, Department of Laser Systems and Physical Technologies, Ukraine http://orcid.org/0000-0002-3688-7948

DOI:

https://doi.org/10.20535/2521-1943.2022.6.3.268173

Keywords:

plasma coating, laser thermocycling, irradiation, heating, bond strength, metallurgical bond, wear resistance

Abstract

The problem of the article is designed to reveal the proposed, developed and researched new method of improving the adhesion strength of plasma wear-resistant coatings on the outer surfaces of weapons made of high-alloy, heat-resistant steels, using additional cyclic (3-4) times their heating by laser radiation to temperatures of 0.6 – 0.8Tpl for a few milliseconds.

The purpose of increasing the resource of use and the quality of the appearance of the weapon by applying wear-resistant coatings with increased adhesion strength to the base using plasma gas-thermal spraying followed by laser thermal cycling.

Determination of the main factors and parameters of the process of laser thermocycling of plasma coatings, their interrelationships, development of an algorithm for determining the conditions of laser thermocycling, establishment of the rational range of their values by mathematical modeling and experimental research.

The results of mathematical modeling of laser cyclic heating of plasma coatings of HTN of different thicknesses are presented, which allows determining the irradiation parameters that ensure their heating to temperatures at the "coating-substrate" boundary ≤1000ºС, on the surface - to Т< Тpl, at maximum cooling rates. It has been proven that laser thermocycling provides an increase in the adhesion strength of coatings to the base from 14–18 to 90–110 MPa, a decrease in porosity from 10–12% to 7–8%, which is due to the redistribution of alloying components at the “coating–base” interface, with the formation of elements of the metallurgical connection, contributes to a significant increase in wear resistance and a decrease in the coefficient of friction due to the formation of secondary ultradispersed film structures.

We consider laser thermocycling of plasma coatings is an effective method of improving their quality and strength of adhesion to the base.

References

  1. K. A. Yushchenko, Yu. S. Borysov, V. D. Kuznetsov and V. M. Korzh, Inzheneriya poverkhni. Kyiv: Naukova dumka, 2007, 559 p.
  2. M. A. Glebova, A. B. Kornev, V. V. Glebov et al., "Povysheniye kachestva gazotermicheskikh pokrytiy pri termicheskoy obrabotke tokami vysokoy chastoty i lazernym luchom", Svarochnoye proizvodstvo, no. 6, pp. 43-46, 2004.
  3. A. V. Bezzubko, "Modifikatsiya struktury i svoystv gazotermicheskikh pokrytiy s pomoshch'yu elektronno-luchevoy obrabotki", in Sbornik materialov konferentsii “Fizika i khimiya vysokoenergeticheskikh sistem“, Tomsk, Russia, 2007, pp. 403-406.
  4. V. S. Goncharov and M. V. Goncharov, "Gibridnaya tekhnologiya gazotermicheskikh uprochnyayushchikh pokrytiy pri vosstanovlenii detaley slozhnoy geometrii", in Sbornik materialov Vserossiyskoy nauchno-tekhnicheskoy konferentsii s elementami nauchnoy shkoly dlya molodezhi, Tolyatti, Russia, 2009, pp. 159-164.
  5. "Pokrytiya i ikh ispol'zovaniye v tekhnike", in Prochnost' materialov i konstruktsiy, V. T. Troshchenko ed. Kyiv: Akademperiodika, 2006, pp. 981–1074.
  6. Tomie Michio and Abf Nobuyuki, “Improvement of sprayed coatings with ultra high voltage EB melting”, Trans. JWRI, vol. 21, no. 2, pp. 229–300, 1992.
  7. Jianfeng Gu, “Jinshu rechuli/Heat Treat”, Metals, no. 2, pp. 1–9, 2013.
  8. V. Lykhoshva, L. A. Savina, V. V. Savin and A. Tymoshenko, “The Application of the Hybrid Method the Powder-Laser-Casting Technology for Production of Porous Alloys Based on Aluminum”, Journal of Metastable and Nanocrystalline Materials, vol. 31, pp. 11–15, 2019. DOI: https://doi.org/10.4028/www.scientific.net/JMNM.31.11.
  9. M. V. Kindrachuk, N. V. Ishchuk and V. V. Posternak, “Trybotekhnichni vlastyvosti plazmovykh pokryttiv z dyskretnoyu strukturoyu”, Problemy trybolohiyi, no. 1, pp. 75–81, 2003.
  10. L. F. Golovko, V. S. Kovalenko, M. V. Kindrachuk, A. K. Skuratovskiy and R. M. K. Khagerizade, Method of manufacturing gas-thermal coatings of metal parts, Patent Ukraine UA64344U, published 10.11.2011.

Published

2022-12-14

How to Cite

[1]
L. Golovko, O. Kaglyak, V. Romanenko, and M. Bloshchytsyn, “Application of Laser Thermocycling to Improve the Quality of Plasma Wear-Resistant Coatings”, Mech. Adv. Technol., vol. 6, no. 3, pp. 328–341, Dec. 2022.

Issue

Section

Up-to-date machines and the technologies of mechanical engineering