GENERALIZED METHOD FOR SELECTING THE PARAMETERS OF PIPELINE VALVES WITH SEALING TYPE «METAL-TO-METAL»
DOI:
https://doi.org/10.20535/2305-9001.2013.67.37755Keywords:
valve sealing elements, deformation, valve seat, valve slide, design, dependencyAbstract
The design approach to flat-type valve locks with feeding the medium onto the slide has been shown. The dependences for the optimal choice of the parameters the valve sealing elements which depend upon the characteristics of the working environment, as well as surface finish sealing surfaces were given. The features of the flat metal seal of the solenoid valve while feeding work flow on the valve slide were shown. A numerical simulation of deformation of the valve sealing was conducted. A picture of the valve slide and valve seat deformation during the application of the work flow onto the slide was obtainedReferences
1. Astahov A. Ju. Obobshhennaja model processa izgotovlenija truboprovodnoj armatury povyshennogo kachestva. Himicheskoe i neftegazovoe mashinostroenie. 2002. No 1. P. 44-45
2. Belokobyl'skij S.V., P.M. Ogar, V.A. Tarasov Optimal'noe proektirovanie zatvorov truboprovodnoj armatury s uplotneniem «metall-metall» Sovremennye tehnologii. Sistemnyj analiz. Modelirovanie: nauch. zhurn. Irkut. gos. u-nt putej soobshhenija. 2008. No 5(17). P. 10-15
3. Shvets Yu. I., V. I. Livshits, A. K. Drevin Mechanism of operation of a gate valve having a self-sealing ring with an axial stop Chemical and Petroleum Engineering Volume 23, Number 4 (1987), 177-181, DOI: 10.1007/BF01149340
4. Ogar P.M., V.A. Tarasov, A.N. Cheremnyh Proektirovanie zatvorov truboprovodnoj armatury Sovremennye tehnologii. Sistemnyj analiz. Modelirovanie: nauch. zhurn. Irkut. gos. u-nt putej soobshhenija. 2007. No 3(15). P. 6-10
5. Gurevich D.F. Raschet i konstruirovanie truboprovodnoj armatury. 4–e izd. Moskow. Mashinostroenie, 1969. 887p.
