PRESSURE CONTROL IN THE HYDRAULIC PUMP INLET CHANNEL USING AN ELECTRONIC CONTROL UNIT
DOI:
https://doi.org/10.20535/2305-9001.2014.70.34526Keywords:
PIV, test stand, gear pump, controllerAbstract
The paper presents a system of inlet pressure control in a gear pump, used at a test stand during the research conducted by means of the PIV method and discusses important requirements of this method. An electronic control system with additional equipment has been applied in the control system. It controlled a proportional throttle flow control valve built-in parallel to the charger vane pump. The paper presents preliminary results and discusses the reasons of the control error. Steps to improve the control accuracy of the inlet pressure have been proposed.References
1.Stryczek J.: Koła zębate maszyn hydraulicznych (Gear wheels of hydraulic machinery), Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw 2007, p. 30-144.
2.Stryczek J. et al., The series of units of the high displacement gear pumps WPZ, International Scientific- Technical Conference Hydraulics And Pneumatics 2012, SIMP, May 16 – 18, 2012, Wroclaw (Poland).
3.Stryczek J., Antoniak P., Słodczyk D., Bednarczyk S., Banaś M.: Badanie i optymalizacja przepływów przez kanały i szczeliny wewnętrzne w modelach pomp WPZ, Część I. (Study and optimization of flow through the channels and slots internal pump models WPZ, Part I) Raport serii Sprawozdania nr S-001/11. Technical University of Wrocław, 2011, Wrocław.
4.Stryczek J. et al., Visualization research of the flow processes in the outlet chamber–outlet bridge–inlet chamber zone of the gear pumps, Archives of Civil and Mechanical Engineering (2014), http://dx.doi.org/10.1016/j.acme.2014.02.010.
5.Stryczek J., Antoniak P., Application of the particle image velocimetry (PIV) to the study on the flow in the internal channels and clearances of the hydraulic gear machines, International Science And Technology Forum, September 5 -7, 2012, Samara (Russia).
6.http://www.visionresearch.com/Products/High-Speed-Cameras/v73/ (2014.04.12).
7.http://www.parker.com/literature/Hydraulic%20Controls%20Europe/HY11-3500UK/PDF_2013/TDA%20UK.pdf (2014.04.12).
8.Goleń W.: Projekt regulatora natężenia przepływu cieczy hydraulicznej. (Project of pressure-compensated flow control valve of hydraulic fluid) Thesis. Technical University of Wrocław, 2013, Wrocław.
