EVALUATION OF «STABILITY CUTTERS» PRODUCTIVITY AND COST TURNING
DOI:
https://doi.org/10.20535/2305-9001.2016.76.63590Keywords:
instrument stability, cost, computer-aided design processes, Sapr_2014Abstract
I In the practice of engineering production today important is the effective use of modern metal-cutting equipment. The cost of such equipment is considerably higher than the cost of previous models. So important is the definition of rational treatment regimes. Necessary to clarify the procedure available vliterature recommendation for setting tool life. The results of virtual modeling in CAPP system «Sapr_2014» roughing turning on the machine HAAS_ST-10Y.Znacheniya reztsazadavalis resistance in the range of 5 - 240 minutes. Presents practical advice on the rational use of zadanoogo equipment and tools. Our procedure is versatile and allows the simulation of the model in the main technological transitions machining.References
Voitenko V.I. The software "Automated design processes of machining SAPR_2014" (2014), State Intellectual Property Service of Ukraine, Bulletin, "Copyright and Related Rights" number 33, Certificate of registration of copyright from number 54522. 04/30/2014.
Guzeeva, V.I., Batueva, V.A. and Surkov, I.V. (2007), Rezanyya regimes for tokarnыh and Drilling and milling machine tools with rastochnыh management of software chyslovыm, Directory, Under the editors, Guzeeva, V.I. Engineering, ISBN: 978-5-217-03404-8, Moscow, Russia.
Kryskov O.D, (2007), The algorithm estimates the cost of electricity and cutting tools in the design of technological operation, Progressive technologies and systems engineering. International technologies, vol. 33, Donetsk, DonNTU, pp. 124 - 129.
Normatyvnыy Factor of the effectiveness kapytalnыh investments. http://bank-explorer.ru/finansy/normativnyj-koefficient-effektivnosti-kapitalnyx-vlozhenij.html 2015h.
Obshhemashinostroitel'nye normativy vremeni i rezhimov rezanija dlja normirovanija rabot, vypolnjaemyh na universal'nyh i mnogocelevyh stankah s chislovym programmnym upravleniem. (1990), Part II. Normativy rezhimov rezanija, Economy, Moscow, Russian.
Velykanova, K.M. (ed) (1975), Raschetы эkonomycheskoy of the effectiveness Novaya tehnyky. Directory. Mashinostroenie, Lviv, Ukraine.
Voitenko, V., (2012), Computer-aided design engineering processes teach. guidances. KPI, Hryf MONMS Ukraine 21.02.2012 р., Kiev, Ukraine.
Kosylovoy, A.H. and Mescheryakova, R.K. (2001), Directory technologist-mashynostroytelya. In 2 tom. Vol.2, 5nd. ed., Engineering, Moscow, Russian.
