ІДЕНТИФІКАЦІЯ ПОХИБКИ ОБЕРТАННЯ РАДІАЛЬНО-УПОРНОГО КУЛЬКОВОГО ПІДШИПНИКА ОПОРИ ШПИНДЕЛЬНОГО ВУЗЛА

Authors

  • Ю. М. Данильченко National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • К. М. Рудаков National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • В. І. Коломієць National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2305-9001.2010.59.78628

Keywords:

Correlation of magnitude of this part is set with the magnitude of error motion of inner ring

Abstract

Theoretical research of possibility of identification of errors motion of inner rings of angular contact ball bearings is conducted after deformations of it outer rings. On an example loaded with axial force bearing changes of the deformed state of outer ring at the fixed rotation of the inner ring and it’s part from failure of raceway geometrical profile and balls diameters are calculated. Correlation of magnitude of this part is set with the magnitude of error motion of inner ring.

Author Biographies

Ю. М. Данильченко, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

д-р техн.наук

К. М. Рудаков, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

д-р техн.наук

В. І. Коломієць, National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv

ас.

Downloads

Published

2016-09-29

Issue

No. 59 (2010)

Section

Original study

License

The authors reserve the right to authorship of the work and pass the journal right of first publication of this work is licensed under a Creative Commons Attribution License, which allows others to freely distribute the work published with reference to the authors of the original work and the first publication of this magazine.