EFFECTIVENESS OF THE MULTIMODE HYDRODRIVE

Authors

  • A. Muraschenko National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv, Ukraine
  • O. Yakhno National Technical University of Ukraine «Kyiv Polytechnic Institute», Kyiv,
  • R. Solonin ANTK «Antonov», Kiev,

DOI:

https://doi.org/10.20535/2305-9001.2013.67.37677

Keywords:

electrohydraulic drive, exergy, exergy method, energy, anergy

Abstract

Purpose. Carrying out mathematical calculations generalized hydraulic systems. Considered schematics combined electrohydraulic drive its modes of operation used in many fields of technology., To provide high quality design work. This will significantly reduce the time to design development and testing of hydraulic systems. And also will help reduce costs for their development and testing.

Design/methodology/approach. The paper used graph-analytical approach to study the functioning of multiple objects. The approach used to assess the energy efficiency of hydraulic drive circuit design based exergy method.

Findings. The influence of operational factors on the loss of pressure in the hydraulic drive. As a result of studies comparing two drive circuit design, it was found that elements of increasing energy costs.

Originality/value. Applied graph-analytical method for calculating the hydraulic multi-hydraulic actuator. What helps determine which areas absorb considerable energy to the system in different modes

References

1. BrodyanskijV.M. Exergeticheskij metod termodinamcheskogo analiza (Exergy method of thermodynamic analysis) Moscow, 1973. 296 p.

2. Terentiev E.F. Exergija kak kriterij otsenki funktsionirovanija tehnologicheskih system (Exergy as a criterion for evaluation of the functioning of technological systems), Arkhangelsk 17-22 June 2002. P.230-233.

3. Yakhno O. Exergeticheskijanalizprivodamehanizatsiyakrilalitaka (Energy analysis of the drive mechanization wing)О. М. Yakhno, О. P. Gubarev, А. М. Murashchenkotain. Кiev, 2011. No 4(34). P. 45-49.

4. YakhnoO.М.VVedenievmehatroniku(Introduction to mechatronics), Кiev, 2008. 528 p.


Downloads

Published

2015-02-11

Issue

Section

Статті