The tibial fractures fixation system deformation characteristics

Authors

  • M. Shidlovskiy Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine
  • M. Dyman Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine
  • T. Omelchenko National Medical University of A.A. Bohomoltsia, Kyiv, Ukraine

DOI:

https://doi.org/10.20535/2521-1943.2018.84.141615

Keywords:

osteosynthesis, tibia, occipital plates, stiffness of fracture fixation, fracture fixation strength, fracture fixation stability

Abstract

The characteristics of stiffness are studied and the fixation means allowable load at fractures of the distal epimetazh of the tibia is calculated. The processes of a fracture points mutual displacements development under the influence of long-term cyclic loads are studied. Metal osteosynthesis was performed using various types of medial and lateral plates with angular stability and blocked plates for fixing fractures in the distal epimetazh of the tibia. The tests are conducted under the influence of actual physiological loads of compression, bending and torsion, including cyclic loading modes. Keywords: osteosynthesis; tibial, occipital plates, stiffness of fracture fixation, fracture fixation strength, fracture fixation stability

References

  1. Bur’yanov, O.A., Kvasha, V. P., Shidlovskiy, M.S., Skobenko, E O., Sobolevskiy, Yu.L., Laksha, A.M., Omelchenko, T.M. and Golovchak, A.V. (2014), “Biomehanichne obgruntuvannya maloinvazi-vnih tehnologiy likuvannya pri perelomah proksimalnogo epimetafizu velikogomilkovoyi kistki (kliniko-eksperimentalne doslidzhennya)”, Travma, vol. 15, no. 1, pp. 9-14.
  2. Mandi, D.M., Belin, R.P., Banks, J. and Barrett, B. ( 2012). “Pilon fractures”, Clinics in po-diatric medicine and surgery, vol. 29, no. 2, pp. 243–78.
  3. Liporace, Frank A. and Yoon, Richard S. (2012), “Decisions and Staging Leading to Definitive Open Management of Pilon Fractures”, Journal of Orthopaedic Trauma, vol. 26, no. 8, pp. 488–498.
  4. Crist, B.D., Khazzam, M., Murtha, Y.M. and Della Rocca, G.J. (2011), “Pilon fractures: advances in surgical management”, The Journal of the American Academy of Orthopaedic Surgeons, vol. 19, no. 10, pp. 612–22.
  5. Shidlovskiy, M.S., Omelchenko, T.M., Diman, M.M. and Fedorchuk, M.P. (2017), “Metodika vi-znachennya deformatsiynih harakteristik sistem fiksatsiyi perelomiv velikogomilkovih kistok”, Materiali vseukrayinskoyi naukovo-tehnichnoyi konferentsiyi molodih vchenih ta studentiv «Innovatsiyi molody – mashinobuduvannyu», “KPI”, Kyiv, pp. 56-59.
  6. Shidlovskiy, M.S., Omelchenko, T.M. and Diman, M.M. (2017), “Deformatsiyni harakteristiki sistem fiksatsiyi perelomiv velikogomilkovih kistok”, XVIII Mizhnarodna naukovo-tehnichna konferentsiya “Progresivna tehnika, tehnologiya ta inzhenerna osvita”, Kyiv, Ukraine, pp. 64-66.
  7. Shy`dlovs`kyj, M.S. and Laksha, A.M. (2017), Eksperymental`ni doslidzhennya zasobiv osteosyntezu, Lenvit, Kyiv, Ukraine.
  8. Zelle, B.A, Bhandari, M, Espiritu, M, and dr. (2006), “Treatment of distal tibia fractures without articular involvement: a systematic review of 1125 fractures”, J Orthop Trauma, 20:76–9.
  9. Shidlovskiy, M.S., Laksha, A.M. and Shpak, D.Yu. (2013), “Unifikatsiya harakteristik deformuvannya v biomehanichnih doslidzhennyah sistem osteosintezu”, Litopis travmatologiyi ta ortopediyi, 1-2 (25-26) pp. 113-117.
  10. Shy`dlovs`ky`j, M.S., Zaxovajko, O.P. and Dyman, M.M. (2017), Pat. 117085 Ukrayina, “Sposib vyznachennya zmishhen` ulamkiv kistok v miscyax perelomiv”, Byul. no. 11, 8p.
  11. Jaarsma, R.L, van Kampen, A. (2004), “Rotational malalignment after fractures of the femur”, J Bone Joint Surg Br. 86 (1100) pp. 4.
  12. Ricci, W.M, Bellabarba, C, Lewis, R, and dr. (2001), “Angular malalignment after intramedullary nailing of femoral shaft fractures”, J Orthop Trauma, 15 (90) pp.5.

Downloads

Published

2018-12-26

How to Cite

[1]
M. Shidlovskiy, M. Dyman, and T. Omelchenko, “The tibial fractures fixation system deformation characteristics”, Mech. Adv. Technol., vol. 84, no. 3(84), pp. 52–60, Dec. 2018.

Issue

No. 3(84) (2018)

Section

Original study

License

Copyright (c) 2020 Mechanics and Advanced Technologies

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The ownership of copyright remains with the Authors.
 
Authors may use their own material in other publications provided that the Journal is acknowledged as the original place of publication and National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” as the Publisher.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work