Functional relationship of the processing conditions with the parameters of the surface condition of the teeth of the rails

Authors

DOI:

https://doi.org/10.20535/2521-1943.2019.87.190548

Keywords:

processing processes, gears, parameter formation, surface layer, functional connection, operational properties, allowance removal process

Abstract

A large number of mechanical methods, machine tools, tools and materials for machining the rack determines the wide possibilities in ensuring the formation of the parameters of the surface layer of the latter and determines their operational properties. Therefore, the question of ensuring the operational properties of gear rails, depending on the parameters of the state of the surface layer of rails, is urgent. In order to successfully solve this problem, the theoretical aspects of the relationship between the parameters of the state of the surface layer of rails and the processes of their processing are considered.
In contrast to the known researches, which provided for revealing the general aspects of connection of certain parameters of the state of the surface layer of rails with the conditions of their processing, the authors suggested the expediency of considering the dependence of the system of parameters of the state of the surface layer, which determine the operational properties of the gear rails with the conditions of their processing. This relationship is expressed in the mathematical dependencies that underlie the development of algorithms and programs. As a consequence, one of the main tasks of the calculation of optimal machining processes is automated, taking into account the provision of the necessary state parameters of the surface layer of gear rails, based on their operational properties. To confirm this direction, the fundamental scientific provisions of the theory of geometric three-dimensional modeling of interconnected processes of removal of allowance and formation during cutting are developed.

References

  1. Vilmos, V. Simon. (2019), “Multi-objective optimization of hypoid gears to improve operating characteristics”, Mechanism and Machine Theory, vol. 146, pp. 1–15. https://doi.org/10.1016/j.mechmachtheory.2019.103727" target="_blank">https://doi.org/10.1016/j.mechmachtheory.2019.103727
  2. Goran, Vukelica, Pastorcicb, D. and Vizentin. G. (2019), Failure analysis of a crane gear shaft, ScienceDirect, 25th International Conference on Fracture and Structural Integrity, Procedia Structural Integrity, vol. 18, pp. 406–412. https://doi.org/10.1016/j.prostr.2019.08.182
  3. Permyakov, O.A., Klochko, O.O. and Synytsya, YU.O. (2017), Syntez tekhnolohichnykh parametriv visokoproduktivnoyi obrobky zubchasti reyok sparenymy frezamy [Synthesis of technological parameters in high-performance processing of gear parts by twin milling cutters], Visnyk NTU «KHPI», Seriya: Tekhnolohiyi v mashynobuduvanni, 17, pp. 71–77.
  4. Belovol, A.V., Klochko, A.A., Naboka, Ye.V., Skorkin, A.O. and Shelkovoy, A.N. (2016), Imitatsionnoye modelirovaniye v zadachakh mashinostroitel'nogo proizvodstva, [Simulation in the problems of engineering production], vol. 2, no. 1. in Shelkovoy, A.N. (ed.), NTU “KhPI”, Kharkiv, Ukraine.
  5. Stepanov, M.S., Klochko, A.A., Kravtsov, A.N. (2015), “Multicriteria regulation of the parameters of the surface layer of parts”, Physical and computer technology, Proceedings of the 21st International Scientific and Practical Conference. Kharkov, December 24–25, pp. 68–76.
  6. Adis J. Muminovic, Adil Muminovic, Elmedin Mesic, Isad Saric, Nedim Pervan Spur Gear Tooth (2019), “Tooth Topology Optimization: Finding Optimal Shell Thickness for Spur Gear Tooth produced using Additive Manufacturing”, TEM Journal, 8 (TEM83-13), pp.788–794. http://www.temjournal.com/content/83/TEMJournalAugust2019_788_794.html
  7. Shelkova, A.N., Klochko, A.A., Naboka, E.V., Mironenko, E.V. and Kravtsov, A.N. (2015), “Nekotoryye aspekty imitatsionnogo matematicheskogo modelirovaniya geometricheskikh parametrov protsessa zubofrezerovaniya”, Tool reliability and optimization of technological systems, 36, pp. 136–149.
  8. Shelkovoy, A., Klochko, A., Naboka, Ye. (2015), Imitatsionnoye modelirovaniye v zadachakh mekhanosborochnogo proizvodstva [Simulation in the problems of mechanical assembly production], LAP LAMBERT Academic, Saarbrücken, Germany.
  9. Kumar, Kalathur, Arul, S., Sriram, G., Mani, V.N. and Kumar, V. Prathap (2016), “Investigating of pitting formation on gear tooth and evaluating life time of gears using sem”, International journal of current engineering and scientific research .vol. 3, no. 6, pp. 96–103.
  10. Li, G., Wang, Z. and Kubo, A. (2017), “Error-sensitivity analysis for hypoid gears using a real tooth surface contact model”, Proc. Inst. Mech. Eng. Vol. 231, no. 3, pp. 507–521.
  11. Lytvyn, O.M. (2007), Interlinatsiya ta interfletatsiya funktsiy i strukturnyy metod V.L. Rvachova. Mathematical methods and physical-mathematical fields, vol. 50, no. 4, p.p. 61–82.
  12. Litvin, O.N. and Pasechnik, V.A. (2006), “Optimizatsiya matematicheskoy modeli poverkhnosti trokhmernogo tela”, Cybernetics and system analysis, no. 1, pp. 103–112.
  13. Lytvyn, O.M. and Pasichnyk, V.O. (2004), “Optymizatsiya horyzontalʹnykh pereriziv matematychnoyi modeli poverkhni manekena z vykorystannyam interlinatsiyi funktsiy”, Reports of NAS of Ukraine, no. 2, pp. 66–71.
  14. Myronenko, E.V., Shelkovyy, O.M., Klochko, O.O. and Kravtsov, O.M. (2013), “Vybir i pryznachennya system parametriv poverkhnevoho sharu tsylindrychnykh velykomodulʹnykh zubchastykh kolis, shcho vyznachayutʹ yikh ekspluatatsiyni vlastyvosti”, Bulletin of the National University of Lviv polytechnics. Coll. of sciences. Optimization of production processes and technical control in engineering and instrument making, no. 772, pp. 207–213.

Downloads

Published

2019-12-29

How to Cite

[1]
O. Klochko, O. Yurchyshyn, N. Seminska, and O. Ohrimenko, “Functional relationship of the processing conditions with the parameters of the surface condition of the teeth of the rails”, Mech. Adv. Technol., no. 3(87), pp. 91–99, Dec. 2019.

Issue

No. 3(87) (2019)

Section

Up-to-date machines and the technologies of mechanical engineering

License

Copyright (c) 2020 Mechanics and Advanced Technologies

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The ownership of copyright remains with the Authors.
 
Authors may use their own material in other publications provided that the Journal is acknowledged as the original place of publication and National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” as the Publisher.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work