Experimental study of materials resistance to cavitation erosion

Authors

DOI:

https://doi.org/10.20535/2521-1943.2020.0.214609

Keywords:

ultrasonic cavitation, ultrasonic vibrations, experiment, cavitation strength of materials, cavitation chambers, cavitation erosion

Abstract

The problems of ensuring the durability of ultrasonic  technological equipment is considered in article. The results of the experiment planning are presented, which made it possible to correctly construct a field study and select construction materials. Experimental materials such as 30ХГСА, СЧ20, Ф4, 08Х18Н10Т and ЛС59_1П were chosen for the field experiment, because all these construction materials have similar values of the Young's modulus. The course and carrying out of full-scale experimental research of erosion destruction of the declared constructional materials from which ultrasonic radiators and details of cavitation chambers can be made are shown. The behavior of the studied samples and the dependence of their weight loss on the processing time at different capacities of the ultrasonic reactor are analyzed. The study identified the best materials in terms of cavitation strength in the presence of fatigue stresses.

References

  1. A.F. Lugovskyi, N.V. Chuhraev, Ul'trazvukovaja kavitacija v sovremennyh tehnologijah [Ultrasonic cavitation in modern technologies], Kiev, Vidavnicho–polіgrafіchnij centr “Kiїvs'kij unіversitet”, 2007. 244 p.
  2. А. Zilinskyi et al., “Performance increase of ultrasound liquid sprayers”, Mechanics and Advanced Technologies, no. 2 (80), 2017, pp. 113–122. doi: 10.20535/2521-1943.2017.80.111878
  3. O.M. Jakhno, K.O. Luhovska and A.V. Movchanuk, “Issledovaniye vozmozhnostey tekhnologii ul'trazvukovoy kavitatsionnoy ochistki elastichnykh poverkhnostey” [Study of the capabilities of the technology of ultrasonic cavitation cleaning of elastic surfaces], Visnyk NTUU “KPI”. Mashynobuduvannia, no. 58, 2010, pp. 234–240.
  4. A.A. Kolos, “The ultrasound clearing in freon-compositions”, Visnyk dvyhunobuduvannia, No. 2, 2014, pp. 192–196.
  5. R.N. Golyikh et al., Ultrasound cavitation treatment of viscous and highly dispersible liquid substance, 2010.
  6. P.N. Beljanin and Zh.S. Chernenko, Aviacionnye fil'try i ochistiteli gidravlicheskih system [Aviation filters and purifiers of hydraulic systems], Moscow, Russia: Mashinostroenie, 1964.
  7. A.F. Luhovskyi, I.A. Gryshko and A.I. Zilinskiy, “Mathematical model of the filtration process in an ultrasonic field of high intensity”, Journal of Mechanical Engineering NTUU “Kyiv Polytechnic Institute, No. 74, 2015, pp. 11–17.
  8. А. Zilinskyi, К. Lugovska and О. Коvalenko, “Features of application of ultrasonic movements in filtering technology of liquid”, Mechanics and Advanced Technologies, no. 2 (83), 2018, pp. 11–17. https://doi.org/10.20535/2521-1943.2018.83.123920
  9. I.M. Bernyk, “Intensyfikatsiia protsesu ekstrahuvannia roslynnoi syrovyny z vykorystanniam ultrazvukovoi kavitatsii” [Intensification of the process of extraction of vegetable raw materials using ultrasonic cavitation], Tekhnika, enerhetyka, transport APK, Iss. 3, 2017, pp. 69–73.
  10. L.V. Marchuk et al., “Inactivation of microorganisms in a high-intensity ultrasonic field”, Naukovi pratsi Donetskoho natsionalnoho tekhnichnoho universytetu. Seriia: Hirnycho-elektromekhanichna, Vol. 195, No. 22, 2010, pp. 195–206.
  11. I.M. Fedotkin and I.S. Gulyi, Kavitatsiya. kavitatsionnaya tekhnika i tekhnologiya, ikh ispol'zovanie v promyshlennosti. Chast' 1 [Cavitation. cavitation technique and technology, their use in industry. Part 1], Kyiv, Ukraine: Poligrafkniga, 1997.
  12. B.A. Agranat et al., Ul'trazvukovaja tehnologija [Ultrasonic technology], Moskow, Russia: Metallurgija, 1974, 503p.
  13. K. Wegener et al., “Fluid elements in machine tools”, CIRP Annals - Manufacturing Technology. Vol. 66, No. 2. 2017, pp. 611–634. https://doi.org/10.1016/j.cirp.2017.05.008
  14. M.M. Glazkov and P.A. Adzembe, Erosive destructions of details of the hydraulic systems of air courts: Proceedings Conf. Problems of dynamics of the pneumatic and hydraulic and fuel systems of aircrafts. Kujbishev, 1990, pp. 114–133.
  15. L. Ye et al., Damage characteristics and surface description of near-wall materials subjected to ultrasonic cavitation Ultrasonics Sonochemistry, 2020. https://doi.org/10.1016/j.ultsonch.2020.105175
  16. A.F. Luhovskyi et al., “The impact of static pressure on the intensity of ultrasonic cavitation in aqueous media”, Journal of Water Chemistry and Technology, vol. 40, no. 3, 2018, pp. 285–299. https://doi.org/10.3103/S1063455X18030050

Downloads

Published

2020-12-29

How to Cite

[1]
O. Luhovskyi, A. Zilinskyi, A. Shulha, A. Lavrinenkov, I. Gryshko, and I. Bernyk, “Experimental study of materials resistance to cavitation erosion”, Mech. Adv. Technol., no. 3(90), pp. 29–33, Dec. 2020.

Issue

No. 3(90) (2020)

Section

Mechanics

License

Copyright (c) 2020 Mechanics and Advanced Technologies

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The ownership of copyright remains with the Authors.
 
Authors may use their own material in other publications provided that the Journal is acknowledged as the original place of publication and National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” as the Publisher.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work