No. 64 (2012)

Статті

• MODELLING OF THE LARGE STRAINS. THE MESSAGE 1. MULTIPLICATE DECOMPOSITION IN THE PRESENCE OF FOUR TYPES OF STRAINS

  К. М. Рудаков, О. А. Добронравов

  • PDF (Українська)

• THE CHOICE OF CUTTING TOOLS AND FORECASTING ITS PERSISTENCE IN THE MACHINE PROCESSING OF PERMALLOY 50N

  Ю. М. Малафеев, Д. Н. Приходько

  • PDF

• AUTHENTICATION OF PARAMETERS OF NONLINEAR HYSTERESIS DESCRIPTIONS OF SPHERICAL HINGES OF SPATIAL SYSTEM OF OCCASIONS IS WITH THE USE OF FUZZY SET AND OF THE DIFFERENTIAL SCALE PROCESSES

  С. В. Струтинський, А. А. Гуржій

• DYNAMICAL ANALYSIS OF THE MECHANICAL VIBRATION SYSTEM «SPINDLE UNIT» OF MACHINE-TOOL

  Ю. М. Данильченко, A. И. Петришин

• COMPLEX METHODS OF TOOLING OF DETAILS WHICH WILL REALIZE FEATURES OF DYNAMICS OF TECHNOLOGICAL SYSTEM OF MACHINE-TOOL

  В. Б. Струтинський, М. І. Покінтелиця

• FORCES OF CUTTING AND ACCURACY AT THREADING GROOVES BY HEADS

  С. С. Добрянський

• INFLUENCE OF SEMICYLINDRICAL CAVITY ON INTEGRAL CHARACTERISTICS OF WALL BOUNDARY LAYER

  В. М. Турик, В. А. Воскобійник, А. В. Воскобійник

  • PDF (Українська)

• TEMPERATURE FIELD OF OUTER CHIP SURFACE

  Д. В. Криворучко, М. Г. Сторчак, М. Г. Сторчак

  • PDF (Українська)

• TUBE LAUNCH UNMANNED AERIAL VEHICLES: CURRENT STATE AND DIRECTION RESEARCH

  О. В. Збруцький, О. М. Масько, В. В. Сухов

  • PDF (Українська)

• APPLICATION OF IMPEDANCE TOMOGRAPHY IN MECHANOTRONIC SYSTEMS WITH ULTRASONIC CAVITATOR

  А. И. Рыбин, А. В. Мовчанюк, А. Ф. Луговской

  • PDF (Українська)

• RATIONALE METHODOLOGIES CALCULATING ref  FOR THROUGH-WALL CRACKED PIPES LOAD BY COMBINATIONFORCE, BENDING MOMENT AND PRESSURE. PART:I

  М. Г. Крищук, А. І. Ориняк

  • PDF (Українська)

• VIBRATION OF THE CIRCULAR ANNULAR PLATE WITH

  О. М. Чемерис

• INFLUENCE OF MODES OF ULTRASONIC CLEANING OF THE PIEZOELECTRIC ELEMENTS ON QUALITY OF THE SILVER ELECTRODES FORMED ON SURFACES

  Ю. І. Коваленко, М. О. Бондаренко, Ю. Ю. Бондаренко

• ANALYSIS OF CURRENT MACHINE-TOOL COMPLEXES MACHINING IN ENGINEERING

  Н. Р. Веселовська

  • PDF (Українська)

• FORMATION OF WEAR-RESISTANT SURFACES BY LASER-PLASMA SURFACING

  Л. Ф. Головко, M. С. Блощицин, В. А. Третяк

• INCREASE OF EFFICIENCY OF DIAMOND AND ABRASIVE TEXTURAL PROCESSING OF THE NATURAL STONE

  В. Д. Курілович, С. В. Ковальов, Ю. Д. Філатов

• CONTROL SYSTEM OF THE AXIAL-PISTON VARIABLE PUMP WITH A PROFILED PORT OF THE COMBINED CAPACITY REGULATOR SPOOL

  Ю. А. Бурєнніков, Л. Г. Козлов, С. В. Репінський

• THEORETICAL RESEARCHES OF HYDRAULIC PULSE VIBROPRESS FOR FLOW VIBRO-BLOWING DEHYDRATION OF HUMID DISPERSIVE MATERIALS

  І. В. Севостьянов

• DEVELOPMENT AND ANALYSIS HYDROSYSTEM CONSTRUCTION TWO-CASCADE HYDRAVLIC BOOSTER OF A TWISTINQ MOMENT WITH TWO PUMPS

  В. С. Лисенко, І. О. Пугач

• INFLUENCE OF CAVITATION ON GEAR PUMPS FLOW PULSATIONS

  О. М. Яхно, Д. В. Костюк, Я. Стричек, П. Антоняк

• FEATURES FORMING SPIRAL GROOVES DRILL SPIRAL DISK TOOL RECTILINEAR FORMS

  Н. С. Равська Н.С, О. А. Охріменко, О. А. Плівак О.А.

• EVALUATION OF SERVICE LIFE WELD METAL OF STEEL 15H2MFA (Т=550ОС) IN THE LONG-TERM CREEP IN STATIC LOADING

  Т. Н. Можаровская, Ф. Ф. Гигиняк

• QUANTITATIVE ESTIMATION OF DFM

  С. В. Лапковський, С. А. Савлюк, М. О. Солдатова

• BENDING OF THREE-LAYER PLATES WITH A RIGID FILLER ON ELASTIC BASE

  В. В. Ярмолюк, С. І. Трубачев

• STATIC CHARACTERISTICS AIR-DRIVEN CONICAL TURN-ON OF SPINDLE ASSEMBLY WITH LONGITUDINAL SLOTS THE RIBLE DEPTH

  В. І. Савуляк, І. В. Федотова

• THEORETICAL AND EXPERIMENTAL RESEARCHES OF HYDRODYNAMIC CAVITATION IN CHEMICAL AND TECHNOLOGICAL SYSTEMS

  Т. И. Веретельник

• THE INVESTIGATION OF A PNEUMOMECHANICAL HIGH SPEED FORMING PROCESS

  В. Гомберг, Е. А. Дьяков

• THE MECHANICS OF DAMAGE ACCUMULATIONS KINETICS IN STRUCTURAL MATERIALS AT A WORK

  A. П. Грабовський, І. І. Бабієнко

• PERSPECTIVES USE OF LASER-ULTRASONIC FINISHING AND STRENGTHENING OF THE SURFACES DETAILS

  В. В. Джемелінський, Г. Ю. Конашевич, Д. А. Лесик

• THEORETICAL ANALYSIS OF SEPARATING PROCESS AT HOT CUTTING BY SHEARS

  П. В. Боровик

• ESTIMATION DEFORMABLE MATERIAL OF BLANKS IN COLD ROLLING

  І. В. Гунько

• PLASTICITY OF METALS AT THE BY VOLUME TENSE STATE

  В. А. Огородников, Л. И. Алиева, И. А. Деревенько

• THE STRESS-STRAIN STATE DURING DIRECT EXTRUSION OF POROUS POWDER BILLETS

  Л. А. Рябичева, Д. А. Усатюк, Н. В. Белошицкий

• THE INVESTIGATION OF THE UNINTERRUPTEDLY-CASTED BILLETS OF SMALL CROSS-SECTION WITH THE SHAPE DEFECT «RHOMBOIDITY» DEFORMATION PROCESS IN BOX PASSES

  Е. Н. Смирнов, С. А. Снитко, С. Ю. Красенков

• THE STRESS CONDITION PARAMETER ACCORDING MATERIAL PROPERTIES AND ITS INFLUENCE ON PLASTICITY

  О. В. Грушко

• MACROINDEXES OF FORMCHANGING AND WORK OF DEFORMATION DURING UPSETTING OF BILLETS BY CONVEX PLATES

  В. В. Кухарь

• THE ANALYSIS OF MANUFACTURING TECHNIQUES OF TUBULAR PRODUCTS MADE OF STEEL 20Х17Н2 BY HYDRAULIC FORGING ON SMOOTH WORK HOLDER

  Ю. Г. Розов, В. В. Піманов, Д. Б. Шкарлута

• INFLUENCE OF TECHNOLOGY OF SYNTHESIS ON STRUCTURE AND PROPERTIES OF THE SINTERED COMPOSIT OF SYSTEM Ti-Fe-C

  В. Д. Рудь, Л. М. Самчук

• AXIOMATICS OF THE PHENOMENON OF THE FRICTION AS MAIN METHODOLOGY OF ITS STUDYING

  С. В. Федоров

  • PDF (Українська)

• ESTIMATION OF A CENTRIFUGE ROTOR STRENGTH AND ANALYSIS OF THE INFLUENCE OF CONSTRUCTIVE AND TECHNOLOGICAL PARAMETERS

  А. Є. Бабенко, Я. І. Лавренко

• CUTTING PROCESS CONTROL ON MACHINE-TOOLS WITH CNC BY USE OF CAM-SYSTEM

  В. Ю. Петраков, А. М. Клавак, А. І. Шевчук

• SPECIFICS OF GRANITE-BASED STONE MICRO-CUTTING MECHANISM

  Л. Танович, М. Попович, Г. Младенович

• IMPROVING THE EFFICIENCY OF ROTARY FORGING THROUGH THE USE OF AFFECTIVE ADAPTED BILLETS

  С. П. Гожій, А. В. Кліско, А. І. Носенко

• INCREASE OF EFFICIENCY OF WORKING INSTRUMENT OF EQUIPMENT OF PROCESSING PRODUCTION AFTER MODIFICATION OF ITS SURFACES NITRITE OF TITAN

  В. С. Антонюк, М. О. Бондаренко, М. В. Хандюк

• SCIENTIFIC PRE-CONDITIONS OF OPREDELNIYA OF TERMS OF FORMING OF SIZES OF THE WORK-HARDENED LAYER AT FORMOOBRAZOVANII OF KRUPNOMODUL'NYKH OF GEAR-WHEELS

  Ю. В. Тимофеев, А. Н. Шелковой, A. А. Клочко